We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single-pole power distribution block, open frame, 1.71 in deep

Bussmann

Bussmann 16204-1 Power Distribution Block 1 Pole 175 A 600 V

SKU CH-PYG8-B38DK

Single-pole power distribution block rated 175 A at 600 V AC/DC, accepting 14 AWG to 2/0 AWG copper conductors with 1.71 in depth

  • Engine BrandEATON BUSSMANN
  • Single-pole design simplifies wiring layouts
  • 175 A copper rating handles heavy loads
  • 600 V AC/DC rating suits industrial circuits
  • Accepts 14 AWG to 2/0 AWG conductors
  • Compact 1.71 in depth saves panel space

Single-Pole Power Distribution Block

The Bussmann 16204-1 is a single-pole power distribution block rated for 175 A at 600 V AC/DC. It accepts copper or aluminium conductors from 14 AWG up to 2/0 AWG on both the line and load sides, making it suitable for industrial control panels and heavy-duty electrical installations.

Open-Design Installation Notes

The open construction allows direct access to the connection points, so wiring is straightforward with standard hand tools. Because there is no insulating cover, installers must maintain proper clearance to grounded surfaces and ensure all terminations are torqued correctly to prevent hot spots on the exposed conductive parts.

Pre-Order Compatibility Checks

Verify that your panel layout provides at least 1.71 in. of depth for the block body and that the available wire gauge falls within the 14 AWG to 2/0 AWG range. Confirm the system voltage does not exceed 600 V AC/DC and that the expected load current stays within the 175 A copper rating before ordering.

Highlights

  • Single-pole design simplifies wiring layouts
  • 175 A copper rating handles heavy loads
  • 600 V AC/DC rating suits industrial circuits
  • Accepts 14 AWG to 2/0 AWG conductors
  • Compact 1.71 in depth saves panel space

Specifications

Engine BrandEATON BUSSMANN

Questions about this item

How can I confirm the block is carrying its rated 175 A after installation?

Measure the voltage drop across each connection while the circuit is under load; a low, stable millivolt reading indicates the 175 A path is sound.

What hardware is included with the 16204-1 block and what must I source separately?

The block itself is supplied; you must provide 14 AWG to 2/0 AWG copper conductors and suitable lugs or ferrules for the line and load sides.

Which version of this single-pole block should I select for a 600 V, 175 A panel?

The 16204-1 is the only version listed — it is rated 175 A at 600 V AC/DC with one pole and 1.71 in. depth, so it matches that requirement directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.