We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open single-pole copper power block, surface mount, 3.69 in deep

Burndy

Burndy BDBSCS1PA Power Distribution Block 1 Pole 175 A 600 V

SKU CH-HM3D-Z0YVA

Single-pole copper distribution block rated 175 A at 600 V, accepts 14 AWG to 2/0 AWG line and 14 AWG to 4 AWG load conductors, surface-mount depth 3.69 in

  • Engine BrandBURNDY
  • Handles up to 175 A continuous current
  • Rated for 600 V maximum operating voltage
  • Accepts copper wire from 14 AWG to 2/0 AWG on line side
  • Accepts copper wire from 14 AWG to 4 AWG on load side
  • Compact 3.69 in depth for surface mounting

Single-Pole Power Distribution Block

The Burndy BDBSCS1PA is a one-pole power distribution block rated for 175 A at 600 V. It accepts copper or aluminium conductors from 14 AWG up to 2/0 AWG on the line side and 14 AWG to 4 AWG on the load side. The open design mounts on a surface with an overall depth of 3.69 in.

Electrical Panels and Industrial Wiring

This block suits panel builders and electricians who need to split or join heavy copper feeds in a single-phase circuit. It is not for installers who require multi-pole distribution, insulated covers or stud-type terminations for ring terminals.

175 A Copper Rating at 600 V

The 175 A maximum current with copper conductors at 600 V is the decisive specification; verify that your load calculation and conductor sizing match this rating before specifying the block.

Highlights

  • Handles up to 175 A continuous current
  • Rated for 600 V maximum operating voltage
  • Accepts copper wire from 14 AWG to 2/0 AWG on line side
  • Accepts copper wire from 14 AWG to 4 AWG on load side
  • Compact 3.69 in depth for surface mounting

Specifications

Engine BrandBURNDY

Questions about this item

Will the 175 A copper rating on this block handle the existing 2/0 AWG feed and 4 AWG branch circuits in my panel?

Yes, the line side accepts copper from 14 AWG up to 2/0 AWG and the load side accepts 14 AWG to 4 AWG, both rated at 175 A maximum.

How can I verify the block is carrying load correctly after surface-mounting it?

With power applied, measure voltage drop across each connection; a low millivolt reading confirms solid contact on the 175 A copper conductors.

Does the package include mounting hardware or insulating covers for the open 1-pole design?

The block itself is supplied; mounting screws and any protective covers are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.