BN-LINK T7(H) HVAC Control 40-108°F 1000W 12-pack
A 12-pack of digital heating thermostats with a 40–108 °F control range, 1000 W capacity, ETL listing, and 4.92 ft probes for seed starting, brewing, or reptile tanks
- TypeHeating, Push Button
- Size/Dimensions4.5 in x 3.5 in x 1.6 in
- ColorBlack
- Voltage12
- Mount TypeSurface Mount
- Relay Contact120 volts
- Simple three-button setup for quick temperature control
- Bright display with LED indicators shows status in darkness
- Durable construction with 4.92 ft probe and 3.94 ft cord
- Versatile 40-108°F range suits gardening brewing and reptile care
- ETL listed safety rated 1000W 8.3A at 120V
HVAC Control 12-pack for heating devices
This twelve-pack supplies identical digital thermostats rated at 1000 W and 120 V for heating-only loads such as seedling mats, heat lamps or reptile pads. Each unit operates from 40 °F to 108 °F and switches a maximum of 8.3 A through a standard three-prong outlet. The controllers are ETL listed and built for indoor horticulture, brewing, fermentation or terrarium warming.
3.94 ft power cord and 4.92 ft probe
A 3.94 ft three-prong mains lead and a 4.92 ft remote sensor ship with every thermostat so the probe can reach inside incubators, greenhouses or vivaria while the display stays outside. The surface-mount housing measures 4.5 in by 3.5 in by 1.6 in and includes a hanging tab for quick placement. Three push buttons handle all programming and °F/°C selection without menus.
Heating-only relay with 40–108 °F range
The internal relay controls resistive heating loads up to 1000 W but cannot switch cooling equipment, inductive motors or voltages above 120 VAC. Temperature resolution is limited to the displayed range of 40 °F to 108 °F with no sub-degree setting. Buyers needing cooling stages, higher amperage or multi-zone control must choose a different controller class.
Highlights
- Simple three-button setup for quick temperature control
- Bright display with LED indicators shows status in darkness
- Durable construction with 4.92 ft probe and 3.94 ft cord
- Versatile 40-108°F range suits gardening brewing and reptile care
- ETL listed safety rated 1000W 8.3A at 120V
Specifications
| Type | Heating, Push Button |
|---|---|
| Brand | BN-LINK |
| Model | T7(H) |
| Size/Dimensions | 4.5 in x 3.5 in x 1.6 in |
| Color | Black |
| Voltage | 12 |
| Mount Type | Surface Mount |
| Relay Contact | 120 volts |
| Item Count | 12 pack |
| Selling Unit | 1 |
| Features | seed germination, seedling growth, indoor gardening, home brewing, fermentation, incubators or reptile terrariums warming, Temperature Display, BN-LINK |
| Part Number | BNQ-T7H |
Questions about this item
How often does the 4.92 ft temperature probe need to be replaced?
The probe is a sealed, waterproof sensor with no moving parts; it typically lasts the life of the controller unless physically damaged.
What stops the unit from overheating during continuous 1000W operation?
The internal relay is rated for 120V at 8.3A and the ETL listing requires it to pass sustained-load temperature rise tests.
How loud is the relay click and how much heat does the housing generate when running all day?
The mechanical relay produces an audible click only when switching; the plastic enclosure stays near ambient temperature because the load current passes through the relay contacts, not the electronics.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0021339BTC
In stock