We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue aerosol can with red and white labelling, 6 oz capacity

Blaster

Blaster PB-50-TS 6 oz Aerosol Lubricant Spray

SKU CH-GYC6-3R2P1

General-purpose petroleum lubricant spray with PTFE additive, operating from 0 to 120 °F and 23 % VOC content

  • Penetrates tight joints fast with aerosol delivery
  • PTFE additive cuts friction for smoother operation
  • Works from 0 to 120 °F in extreme temps
  • Low 23 % VOC meets 50-state compliance
  • Flash point 148 °F for safer handling

Purpose & Audience

Blaster PB-50-TS is a petroleum-based aerosol lubricant delivered in a six-ounce can with a three-ounce net fill. It suits mechanics, maintenance staff and DIYers who need a general-purpose penetrant for freeing stuck fasteners, quieting hinges or protecting metal surfaces in workshops and garages.

Sustained-Load Behaviour

The formula relies on petroleum distillates with a PTFE primary additive to maintain a wet film that resists run-off during extended contact. It remains effective across a wide temperature window, from zero degrees Fahrenheit up to 120 degrees Fahrenheit, and carries a flash point of 148 degrees Fahrenheit for safer handling under continuous use.

Build & Connectors

The pressurised can dispenses a colourless spray through a fixed nozzle, allowing targeted application without extra tools. VOC content is 23 percent and the product meets 50-state and CARB compliance, so it can be used in regulated regions. It is not NSF rated, so it should not be chosen for food-grade or potable-water environments.

Highlights

  • Penetrates tight joints fast with aerosol delivery
  • PTFE additive cuts friction for smoother operation
  • Works from 0 to 120 °F in extreme temps
  • Low 23 % VOC meets 50-state compliance
  • Flash point 148 °F for safer handling

Specifications

BrandBLASTER

Questions about this item

Does the spray get hot or noisy when used continuously?

The aerosol has no moving parts, so it produces no noise and generates no heat during application.

What tools or surfaces do I need to have ready before spraying?

Apply directly to metal parts such as hinges, bolts, or chains; no extra equipment is required.

Will the PTFE additive harm the finish on vintage chrome or painted parts?

The formula is a colourless petroleum distillate with PTFE and is safe on most metal finishes when used as directed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.