We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular wall-mounted PIR motion sensor outlet with spherical sensor housing and control buttons

Black & Decker PIR Motion Sensor Plug Outlet 39 ft Range 125 V 60 W

SKU CH-0HFF-AS6Y5

Indoor PIR motion sensor plug outlet with adjustable 13 ft, 26 ft, and 39 ft detection ranges, customisable auto-off delays from 3 s to 1 h.

  • TypeSpring Wound Timers
  • Voltage12
  • Amps20
  • Timing RangeAutomatic
  • Watts60 watts
  • Number of Receptacles1 Pack(New), XNS-06
  • Automatic on/off saves energy with PIR motion detection
  • Adjustable delay from 3 s to 1 h matches any room use
  • Three detection ranges up to 39 ft cover small or large spaces
  • Ambient light sensor prevents daytime activation for efficiency
  • No neutral or ground wire needed for simple plug-in install

Hands-Free Motion Activation

This Black & Decker PIR motion sensor plug outlet automatically turns connected lights on when movement is detected and off after a preset delay. It operates on a 125 V supply and supports loads up to 60 W. The unit is designed for indoor wall-mount installation without requiring a neutral or ground wire.

Adjustable Detection Range

Three selectable ranges let you tailor coverage: 39 ft, 26 ft, or 13 ft. The auto-off delay is also adjustable from 3 s up to 1 h. These settings replace fixed-range or fixed-delay switches, making the upgrade worthwhile when you need flexible coverage for garages, hallways, or storage rooms.

Suits DIY Indoor Upgrades

Ideal for renters or owners adding motion control to existing lamps or fixtures without rewiring. Not suited for outdoor use, high-wattage appliances beyond 60 W, or installations that require hard-wired integration with a lighting circuit.

Highlights

  • Automatic on/off saves energy with PIR motion detection
  • Adjustable delay from 3 s to 1 h matches any room use
  • Three detection ranges up to 39 ft cover small or large spaces
  • Ambient light sensor prevents daytime activation for efficiency
  • No neutral or ground wire needed for simple plug-in install

Specifications

TypeSpring Wound Timers
Voltage12
Amps20
Timing RangeAutomatic
Watts60 watts
Number of Receptacles1 Pack(New), XNS-06
Size/Dimensions52 cm x 35 cm x 27 cm
StylePlug In
Switch TypeDigital
Maximum Time SettingAutomatic
Number of Poles1-way
Enclosure TypeIndoor
Input Voltage125 volts
MountingWall Mount
Operating Temperature Range-10 degrees_celsius to 45 degrees_celsius
Battery Typelithium
BrandBlack & Decker
ModelHand Rivet Nut Setter Kit
Item Count12 pack
Selling UnitPack
Commercial/ResidentialCommercial
Part NumberXNS-06

Questions about this item

What size wall opening does the 52 cm by 35 cm by 27 cm sensor housing need for mounting?

The unit measures 52 cm by 35 cm by 27 cm, so allow at least that footprint on the wall plus clearance for the spherical sensor housing to be unscrewed during setup.

Which step do installers most often skip when setting the three detection ranges and nine delay options?

After removing the battery insulation tab, you must press and hold the three-ring button to choose the 13 ft, 26 ft, or 39 ft range, then press and hold the sun icon button to pick the light-sensing mode, and finally set the delay from 3 s up to 1 h.

When will the internal lithium battery need replacement?

The lithium battery powers the PIR sensor and timer circuitry; replace it when the unit no longer triggers the 60 W load at 125 V or the indicator fails to respond after a mode change.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.