We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium main unit with integrated metal tool holders and detachable handpieces

BFKK

BFKK 948D IV 5-in-1 Micro Soldering Station 1000W

SKU CH-VGDH-PWPD7

A 5-in-1 micro soldering station combining a C245 iron, C120 hot tweezers, 110 W desoldering gun, 1000 W hot-air rework unit and suction pen with detachable handpieces and multiple tips

  • 5-in-1 station combines iron, tweezers, gun, hot air and suction pen for complete microscope rework
  • Micro iron and hot tweezers heat in seconds from 194°F to 842°F with C245 and C120 cartridges
  • 110W desoldering gun adjusts 716°F to 896°F using four nozzles 0.8 1.0 1.2 2.0mm
  • 1000W hot air station features detachable handpiece with five quick-change nozzles 5 8 12mm straight 8 10mm spiral
  • Aluminium chassis integrates lockable holders for every handpiece keeping tools organised and ready

5-in-1 Micro Soldering Station

The BFKK 948D IV combines a C245 micro soldering iron, C120 hot tweezers, 110W desoldering gun, 1000W BGA hot air rework station, and suction pen in one aluminium chassis. All five handpieces operate simultaneously and mount on integrated metallic holders. Designed for microscope-level board work, it ships with three C245 tips, two C120 tweezer pairs, four desoldering nozzles, and five quick-change hot air nozzles.

For multi-tool bench technicians.

Technicians who switch between fine-pitch SMD placement, through-hole desoldering, and BGA reflow under magnification gain a single station that covers every step. The 194 °F to 842 °F range on the iron and tweezers plus 716 °F to 896 °F on the desoldering gun handle lead-free alloys. Hobbyists needing only occasional iron work or a standalone hot-air pencil will find the tool count and 1000 W capacity excessive.

Detachable handpieces free bench space

Each tool plugs into front or rear receptacles so the station stays wired while handpieces swap in seconds. The lockable top holder secures the micro iron and tweezers; a built-in cradle holds the desoldering gun and a side hook stores the suction pen. All five nozzles sets (0.8, 1.0, 1.2, 2.0 mm desoldering; 5, 8, 12 mm straight and 8, 10 mm spiraling hot air) store beside the unit, keeping the microscope field clear.

Highlights

  • 5-in-1 station combines iron, tweezers, gun, hot air and suction pen for complete microscope rework
  • Micro iron and hot tweezers heat in seconds from 194°F to 842°F with C245 and C120 cartridges
  • 110W desoldering gun adjusts 716°F to 896°F using four nozzles 0.8 1.0 1.2 2.0mm
  • 1000W hot air station features detachable handpiece with five quick-change nozzles 5 8 12mm straight 8 10mm spiral
  • Aluminium chassis integrates lockable holders for every handpiece keeping tools organised and ready

Specifications

No published specifications for this item yet.

Questions about this item

Does the station include the C245 and C120 cartridges needed for the micro iron and hot tweezers?

Yes, it ships with three C245 cartridges (Type-I, 3.2K, 3.2D) and two pairs of C120 cartridges (Type-IS, Type-K).

Can the 1000 W hot-air handpiece run at the same time as the 110 W desoldering gun?

The unit is designed so all five tools can operate simultaneously, so the hot-air and desoldering functions work together.

How do I confirm the micro soldering iron has reached its set temperature?

The iron heats in seconds; when the display shows the selected value between 194 °F and 842 °F the tip is ready.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.