We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
6U wall-mount open frame rack, 24in depth, black powder-coated steel, 180-degree swing gate

BFKK

BFKK 6U Wall Mount Server Rack Swing Gate 24in Depth Square&Tapped Holes

SKU CH-ST4M-TZ24V

A 6U open-frame wall rack with a 180-degree swing gate holds 19-inch gear at 24-inch depth and supports 110 lbs static load

Size 6U

  • 6U wall-mount rack fits 19in equipment
  • 24in depth provides room for deeper servers
  • 180° swing gate opens both sides for cable access
  • Cold-rolled steel frame supports 110 lbs static load
  • Square and tapped holes interchangeable per EIA-310-E

6U Wall-Mount Rack for 19in Gear

This 6U wall-mount server rack accepts standard 19-inch network, AV and IT equipment in a compact open frame. It suits small offices, home labs or media closets where floor space is limited and a full-height cabinet is unnecessary. The swing-gate design lets the frame pivot away from the wall for rear access. Buyers needing deeper enclosures or higher static-load ratings should consider larger models.

Open Frame Aids Airflow and Access

The open-frame construction promotes passive heat dissipation around mounted devices without built-in fans. A 180-degree swing gate allows technicians to reach rear cabling from either side during maintenance. Static load capacity is rated at 110 lbs and sliding load at 55 lbs. Installations requiring forced-air cooling or higher weight allowances will need a different solution.

Cold-Rolled Steel with Dual Hole Pattern

The rack is fabricated from cold-rolled steel finished in electrostatic powder coat to resist rust and corrosion. Mounting rails offer both square and tapped holes that can be interchanged to match equipment fasteners. Wall mounting uses a 16-inch hole spacing and the unit complies with EIA/ECA-310-E. Installers without 16-inch stud centres or concrete walls must source alternative fixings.

Highlights

  • 6U wall-mount rack fits 19in equipment
  • 24in depth provides room for deeper servers
  • 180° swing gate opens both sides for cable access
  • Cold-rolled steel frame supports 110 lbs static load
  • Square and tapped holes interchangeable per EIA-310-E

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I mount the 6U rack to the wall, and which step is most often missed?

Use the supplied drilling template to mark the 16inch hole spacing, secure the frame to studs or concrete anchors, then attach the swing gate; the step most often missed is confirming the wall can hold the 110 lb static load before drilling.

What maintenance or replacement will the rack need over time?

The cold-rolled steel frame with electrostatic powder coat resists rust, so no scheduled maintenance is required; only the included mounting hardware may need replacement if it becomes damaged or lost.

What limit appears first when the rack is fully loaded and used continuously?

The sliding load rating of 55 lbs is reached before the 110 lb static rating, so equipment that is frequently extended on rails must stay within that lower limit.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.