We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bernard Q2015TB8CMC MIG welding gun, 15 ft cable, curved handle, 30 degree fixed neck

Bernard

Bernard Q2015TB8CMC MIG Welding Gun 200 A 15 ft

SKU CH-TPKM-33HJZ MPN Q2015TB8CMC

A 200 A air-cooled MIG gun with a 15 ft cable, 30-degree fixed neck and Miller rear connection for flux-cored and MIG welding

  • TypeWelding Parts & Supplies
  • 200 A output handles heavy MIG jobs
  • 100 % duty cycle at 200 A for continuous welding
  • 15 ft cable gives wide reach around the workpiece
  • Fixed 30° neck angle suits comfortable gun positioning
  • Centrefire tip series simplifies consumable changes

MIG Welding Gun 200 A 15 ft

The Bernard Q2015TB8CMC is an air-cooled MIG welding gun rated for 200 amps at a 100 percent duty cycle using CO2 shielding gas. It features a 15 ft cable with a Miller rear connection, a curved handle and a fixed 30-degree neck tube. The gun accepts wire up to .063 in diameter and uses Centerfire series contact tips. It supports both MIG and flux-cored arc welding processes.

Welders needing Miller-ready 200 A air-cooled gun

This gun suits welders who require a 200 A air-cooled MIG gun with a direct Miller power-pin connection and a 15 ft reach. The fixed 30-degree neck and curved handle favour standard grip and positioning. Buyers who need a water-cooled torch, a different rear connection such as Tweco or Euro, a rotatable neck, or a longer cable should look at other models.

Miller rear connection decides fit

The single specification that determines compatibility is the Miller rear connection type. Only wire feeders or machines equipped with a matching Miller power-pin receptacle will accept this gun without an adapter. Verify the feeder connection before purchase.

Highlights

  • 200 A output handles heavy MIG jobs
  • 100 % duty cycle at 200 A for continuous welding
  • 15 ft cable gives wide reach around the workpiece
  • Fixed 30° neck angle suits comfortable gun positioning
  • Centrefire tip series simplifies consumable changes

Specifications

BrandBERNARD
TypeWelding Parts & Supplies

Questions about this item

How do I fit the Bernard Q2015TB8CMC gun onto my Miller machine, and what step is often missed?

Connect the rear plug to the Miller feeder, then secure the liner and contact tip for 0.063 in wire; the step often missed is fully seating the liner so wire feeds without binding.

Which consumables on the Q2015TB8CMC will need replacing during regular MIG or flux-cored work?

Centerfire contact tips, the diffuser and the nozzle wear out first; the fixed 30-degree neck tube stays unless damaged, and the air-cooled cable lasts the gun's life.

At what point does the 200 A, 100 percent duty-cycle rating limit continuous welding with CO2?

The 200 A, 100 percent duty cycle means you can weld continuously at that current with CO2; the limit appears first if you exceed 200 A or use a gas mix that lowers the rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.