BatteryJack inc.
BatteryJack inc. 12V 7.0Ah SLA Battery 100 Pack
Sealed 12 V 7.0 Ah AGM batteries in a 100-pack, maintenance-free with over 90 % gas recombination
- 12V 7.0Ah capacity powers equipment reliably
- AGM sealed construction prevents electrolyte leakage in any position
- Maintenance-free design eliminates water checks and specific gravity tests
- Gas recombination recovers over 90% of generated gas for longer service
- 100-pack bulk supply suits large-scale UPS and backup installations
12 V 7.0 Ah SLA battery pack
This 100-pack supplies sealed lead-acid batteries rated at 12 volts and 7.0 Ah each. They use absorptive glass mat construction and are classified as non-spillable for safe operation in any orientation. The design recombines over 90 percent of generated gas during normal use. No electrolyte checks or water top-ups are required.
Ideal for bulk UPS and backup deployments
Suited for organisations that maintain large fleets of uninterruptible power supplies, alarm panels or emergency lighting systems. The three-year warranty on UPS and backup devices matches typical service intervals. Buyers needing higher individual capacities or different chemistries should evaluate other options.
Integrates into rack or cabinet arrays
Each unit fits standard battery trays and connects via its existing terminals without special cabling. The maintenance-free design frees technician time otherwise spent on fluid checks. Non-spillable certification simplifies transport and storage compliance. Ensure the charging system matches the 12 V specification before installation.
Highlights
- 12V 7.0Ah capacity powers equipment reliably
- AGM sealed construction prevents electrolyte leakage in any position
- Maintenance-free design eliminates water checks and specific gravity tests
- Gas recombination recovers over 90% of generated gas for longer service
- 100-pack bulk supply suits large-scale UPS and backup installations
Specifications
No published specifications for this item yet.
Questions about this item
What voltage and capacity must my UPS or backup device support to use these 12V 7.0Ah batteries?
Each battery delivers 12 volts and 7.0 amp-hours, so the host device must accept that exact voltage and capacity rating.
Will the AGM sealed construction and gas recombination work reliably in older equipment designed for flooded lead-acid cells?
Yes, the sealed AGM design prevents electrolyte leakage in any position and recombines over 90 percent of generated gas, making it a direct drop-in for legacy compartments.
How can I confirm the pack is performing correctly after installation?
Measure each unit with a multimeter; a healthy reading at rest should be close to 12 volts, and the batteries should hold charge under load without voltage sag.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



