Banner
Banner T30UXDC Temp Compensation Ultrasonic Sensor 300-3000mm 10-30Vdc NPN/PNP 2m Cable IP6
Ultrasonic proximity sensor detecting objects from 300 mm to 3 m with temperature compensation, selectable NPN/PNP output and 2 m cable
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Temperature-compensated accuracy within 0.02% per °C
- Selectable NPN or PNP output with 100 mA drive
- 300 mm to 3000 mm ultrasonic sensing range
- 10–30 V dc supply with 500 ms power-up delay
- IP6-rated PBT barrel housing withstands 30 G shock
Ultrasonic Sensor 300-3000 mm
The Banner T30UXDC is a barrel-style proximity sensor that uses ultrasonic time-of-flight measurement. It suits automation engineers who need non-contact distance detection up to three metres. The 10-30 V dc supply and selectable NPN or PNP output make it compatible with common industrial control systems. Buyers who require analog output or IO-Link communication should look elsewhere.
Cable Connection and Teach Setup
A fixed 2 m cable with four conductors terminates the sensor, so no separate cordset is required. Output mode is chosen via the teach button; there is no PC configuration option. The 500 ms power-up delay means the first reading is not immediate after supply voltage is applied. Vibration and shock ratings meet MIL-STD-202F Method 201A and IEC 60947-5-2 respectively.
Discrete Output 100 mA Max
The single switched output sinks or sources up to 100 mA with saturation below 1.6 V for NPN and below 3 V for PNP. Short-circuit protection is built in. Repeatability is specified as 0.1 % of measured distance with a 1.5 mm minimum. Temperature effect is 0.02 % of sensing distance per degree Celsius. IP6 rating covers the PBT housing.
Highlights
- Temperature-compensated accuracy within 0.02% per °C
- Selectable NPN or PNP output with 100 mA drive
- 300 mm to 3000 mm ultrasonic sensing range
- 10–30 V dc supply with 500 ms power-up delay
- IP6-rated PBT barrel housing withstands 30 G shock
Specifications
| Brand | BANNER |
|---|---|
| Model | T30UXDC |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How can I verify the T30UXDC ultrasonic sensor is operating correctly after installation?
Check the LED indicators on the sensor housing; they show output status and confirm the 10-30V dc supply is active and the discrete NPN/PNP output is switching within the 0.1% repeatability spec.
What is included with the T30UXDC sensor and what must be purchased separately?
The box contains one T30UXDC sensor with a fixed 2 m (6.5 ft) 4-wire cable; no quick-disconnect connector or mounting hardware is supplied, so brackets or a compatible mounting block must be bought separately.
Which sensing-range version of the T30UXDC should I choose for my application?
This model covers 300 mm to 3000 mm; select it when the target falls inside that window — objects closer than 300 mm or farther than 3 m require a different sensor variant.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



