We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red cylindrical 12 mm sensor receiver with 2 m cable and IP67 rating

Banner

Banner S12SP6R 12 mm 15 m receiver electrician tool

SKU CH-5PZF-Y4K17 MPN S12SP6R

12 mm opposed-mode receiver with 15 m range, 10-30 V dc supply, PNP output and IP67 rating

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 15 m sensing range with 10-30 V dc supply
  • Complementary PNP output for direct PLC connection
  • IP67 and NEMA 6P ratings protect against dust and water
  • Thermoplastic barrel withstands -40 °C to 70 °C operation
  • 2 m cable with visible red LED simplifies alignment

12 mm opposed-mode receiver for 15 m sensing

The Banner S12SP6R is a barrel-style photoelectric receiver built for opposed-mode detection across a 15 m range. It operates on a 10-30 V dc supply and delivers complementary PNP discrete outputs through a 2 m cable. The red visible LED sensing beam simplifies alignment during installation.

Sealed thermoplastic housing rated IP67 and NEMA 6P

The sensor withstands ambient temperatures from -40 °C to 70 °C and up to 90 % relative humidity at 50 °C. A polycarbonate lens and fully potted thermoplastic barrel protect the electronics from wash-down and immersion. Response time is 3 ms on and 1.5 ms off with 375 µs repeatability.

Four-pin cable connection with no quick-disconnect

The fixed 2 m cable exits the 12 mm diameter barrel directly, eliminating a separate connector that could loosen under vibration. Light/dark operate mode is factory-set, and no adjustments or remote teach functions are provided. Buyers who need a matching emitter, a different output type or a connectorised version should select another model.

Highlights

  • 15 m sensing range with 10-30 V dc supply
  • Complementary PNP output for direct PLC connection
  • IP67 and NEMA 6P ratings protect against dust and water
  • Thermoplastic barrel withstands -40 °C to 70 °C operation
  • 2 m cable with visible red LED simplifies alignment

Specifications

BrandBANNER
ModelS12SP6R
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I mount the 12 mm barrel receiver and wire the 4-pin cable correctly?

Mount the 12 mm thermoplastic barrel using standard M12 hardware, then connect the 2 m 4-pin cable to a 10-30 V dc supply; the complementary PNP output switches on the receiver side, so wire the load between the output and 0 V.

What maintenance does the IP67-rated receiver need over its 3-year parts coverage?

Inspect the polycarbonate lens and cable jacket periodically for abrasion or chemical damage; clean the lens with a soft cloth and mild detergent, and verify the cable gland seal remains tight to maintain the IP67 and NEMA 6P ratings.

At what ambient temperature does the receiver hit its operating limit first during continuous use?

The specified maximum operating temperature is 70 °C; above this the sensor may exceed its 3 ms on / 1.5 ms off response time and repeatability of 375 µs, so sustained ambient heat is the first limiting factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.