We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red polycarbonate optical touch button with black face, M30×1.5 mount, IP66 rated, 59.9×43.2×48.0 mm

Banner

Banner Q45UBB63DA optical touch button electrician tool 10-30V dc IP66 M30×1.5 59.9×43.2×48.0 mm

SKU CH-J9DP-54VT8 MPN Q45UBB63DA

M30 × 1.5 threaded optical touch button with momentary action, 10-30 V dc PNP output, IP66 and NEMA 4X rated for -20 to 50 °C environments

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Optical touch activation works without physical pressure
  • Operates on 10-30V dc supply voltage range
  • IP66 rating protects against dust and water jets
  • M30×1.5 mounting thread enables secure installation
  • Complementary PNP output suits industrial control systems

Industrial optical touch button for 10-30V dc

The Banner Q45UBB63DA is a momentary-action optical touch button built for industrial control panels. Its polycarbonate housing carries an IP66 and NEMA 1, 3, 4, 4X, 12, 13 rating. The M30×1.5 mounting thread suits standard 30 mm cut-outs. Complementary PNP outputs simplify wiring for automation engineers.

Sealed housing handles dust.

The sealed polycarbonate body resists ingress during high-pressure cleaning and tolerates ambient temperatures from -20 °C to 50 °C. Non-condensing humidity up to 90 % at 50 °C is supported. Solid-state optical sensing eliminates moving parts, so no mechanical wear or contact bounce occurs. Supply current stays within the 10-30V dc range.

9 m quick-disconnect cable

A 9 metre MINI-style quick-disconnect cable ships with the unit, reducing termination time on site. The black field cover protects the optical surface from scratches and ambient light interference. No IO-Link, Modbus RTU or wireless functions are present, so integration stays limited to discrete PNP signalling. Pro-Editor configuration is not supported.

Highlights

  • Optical touch activation works without physical pressure
  • Operates on 10-30V dc supply voltage range
  • IP66 rating protects against dust and water jets
  • M30×1.5 mounting thread enables secure installation
  • Complementary PNP output suits industrial control systems

Specifications

BrandBANNER
ModelQ45UBB63DA
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How is the M30×1.5 threaded sensor mounted and what wiring step is often missed?

Screw the sensor into an M30×1.5 hole, tighten to the recommended torque, then plug the 4-pin MINI-style quick-disconnect cable; the step often missed is connecting all four conductors so both normally-open and normally-closed signals work.

What replacement interval applies to the sensor and its cable?

The supplier lists a three-year parts period and one-year labour period; the 9 m cable and optical touch button should be inspected at those intervals and replaced if the housing, lens or connector show damage.

At what ambient temperature does the sensor reach its operating limit first?

The maximum operating temperature is 50 °C; above this the polycarbonate housing and optical sensing element may exceed their rated limits before the IP66 seal or 10-30 V dc supply becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.