We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cylindrical optical touch button with red lens, M30 thread, 2 m cable, IP66 rated

Banner

Banner OTBA5 Optical Touch Button 120 V AC SPDT Relay IP66 2 m Cable

SKU CH-QX81-R9S4G MPN OTBA5

An optical touch button with momentary action, 120 V AC SPDT relay output, IP66 rating and a 2 m cable

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Optical touch actuation eliminates mechanical wear
  • SPDT relay output switches 120 V AC loads directly
  • IP66 and NEMA 4X ratings withstand wash-down environments
  • 2 m cable and M30 × 1.5 thread simplify installation
  • Operates reliably from -20 °C to 50 °C

Momentary Optical Touch Button for 120 V AC Systems

The Banner OTBA5 is a momentary-action optical touch button designed for 120 V AC supply circuits. It uses a single-point optical sensing mode with a black field cover and a thermoplastic polysulfone housing. An SPDT electromechanical relay provides the output, making the device suitable for industrial control panels that require a non-mechanical actuation method.

Sustained Operation Within Rated Temperature

The button operates continuously between -20 °C and 50 °C with a maximum relative humidity of 90 % at 50 °C non-condensing. Input and output response times are each capped at 100 ms, so repeated actuations remain consistent during extended shifts. The IP66 and NEMA 1, 3, 4, 4X, 12, 13 ratings confirm the enclosure resists dust and water ingress under prolonged exposure.

Base-Mount Housing with 2 m Cable and M30 Thread

A saddle-style base mount with an M30 x 1.5 thread secures the unit to panels or brackets, while the 2 m (6.5 ft) five-conductor cable exits the housing for direct wiring. The compact body measures 59.9 x 43.2 x 48.0 mm, allowing installation in tight enclosures without additional mounting hardware. Buyers who need a maintained-action switch or a different supply voltage range should select an alternative model.

Highlights

  • Optical touch actuation eliminates mechanical wear
  • SPDT relay output switches 120 V AC loads directly
  • IP66 and NEMA 4X ratings withstand wash-down environments
  • 2 m cable and M30 × 1.5 thread simplify installation
  • Operates reliably from -20 °C to 50 °C

Specifications

BrandBANNER
ModelOTBA5
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

Does the OTBA5 generate noticeable heat or noise when powered continuously at 120 V AC?

The optical touch button uses a solid-state sensing element and an electromechanical SPDT relay rated for 100 ms response time; it has no fan or moving parts beyond the relay contacts, so heat and audible noise are minimal during all-day operation.

What wiring and mounting hardware must I already have to install this button?

You need a 105-130 V AC supply, a 5-conductor cable run to the 2 m flying lead, and an M30 × 1.5 threaded cut-out for the saddle-mount base.

Will the OTBA5 work reliably next to older 120 V AC relay panels in the same enclosure?

Yes — the NEMA 1, 3, 4, 4X, 12, 13 and IP66 ratings mean it tolerates the same temperature range (-20 °C to 50 °C) and humidity (90 % non-condensing) as legacy industrial panels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.