We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular red thermoplastic sensor with M18 mount and 2 m cable

Banner

Banner MIAD9LVAG Mini-Beam retroreflective sensor 2 m cable 2000 mm range IP67

SKU CH-9DP2-TD47W MPN MIAD9LVAG

A retroreflective sensor with visible red LED, 2 m cable, 2000 mm range, IP67 and NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, 13 ratings, operating from -40 °C to 70 °C on 5-15 V dc

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Visible red LED beam simplifies alignment
  • Polarized retroreflective sensing detects targets up to 2000 mm
  • IP67 and NEMA 4X enclosure withstands wash-down environments
  • 5 V to 15 V dc supply integrates with standard control voltage
  • 2 m pre-wired cable eliminates separate connector cost

Mini-Beam retroreflective sensor 2 m cable

The Banner MIAD9LVAG is a polarised retroreflective photoelectric sensor with a visible red LED beam. It detects targets up to 2000 mm away and mounts via an M18 barrel on a rectangular housing. The unit operates on 5-15 V dc and provides a discrete constant-current output for simple integration. It is suited for industrial automation engineers who need reliable presence detection in a compact form.

IP67 and NEMA-rated housing for harsh environments

The thermoplastic housing meets IP67 and multiple NEMA ratings including 4X, 6 and 13, sealing the sensor against dust and temporary immersion. Encapsulated construction and an operating range of -40 °C to 70 °C at 90 % humidity allow continuous use in wash-down or outdoor settings. Power draw stays low on the 5-15 V dc supply with a 5 ms response time. No active cooling or acoustic noise is produced by the solid-state design.

Potentiometer adjustment and 2 m integral cable

A built-in potentiometer lets installers set the light/dark operate threshold without external tools or software. The 2 m cable is permanently attached, eliminating a separate quick-disconnect fitting and reducing potential leak paths. Intrinsically safe certification supports use in hazardous areas, while the two-wire output simplifies wiring to PLCs or relays. The package contains one sensor; no mounting bracket, reflector or configuration software is included.

Highlights

  • Visible red LED beam simplifies alignment
  • Polarized retroreflective sensing detects targets up to 2000 mm
  • IP67 and NEMA 4X enclosure withstands wash-down environments
  • 5 V to 15 V dc supply integrates with standard control voltage
  • 2 m pre-wired cable eliminates separate connector cost

Specifications

BrandBANNER
ModelMIAD9LVAG
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I mount the M18 housing on a bracket and set the sensing range?

Thread the 18 mm barrel through an M18 hole, secure with the supplied lock-nuts, run the 2 m cable to the 5-15 V dc supply, then turn the potentiometer until the visible red LED locks on the retroreflector at up to 2000 mm.

What ongoing maintenance does the sensor need?

Wipe the acrylic lens periodically to remove dust or oil; the encapsulated, IP67-rated housing requires no internal service, and the polarized retroreflective mode has no user-replaceable emitter or receiver parts.

At what temperature does the sensor stop operating reliably?

The unit is rated for continuous use from -40 °C to 70 °C; beyond 70 °C the 5 ms response time and constant-current output can no longer be guaranteed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.