Banner D12SP6FP Photoelectric Switch Sensor 10-30 V dc 2 m Cable IP11

Purpose & Fit

The Banner D12SP6FP is a plastic fibre-optic photoelectric switch sensor designed for object-counting tasks on DIN-rail mounted control panels. It operates on 10-30 V dc supply and provides a complementary PNP discrete output through a fixed 2 m cable. The thermoplastic housing carries an IP11 rating and NEMA 2 classification for indoor industrial environments. Buyers who need a quick-disconnect fitting or a higher ingress protection rating should select a different model.

Deciding Spec

The single specification that determines fit is the 130 µs repeatability figure, which defines how consistently the sensor detects repeated objects at high speed. A minimum response time of .5 ms supports fast counting cycles, while the 100 ms power-up delay sets the earliest moment the output becomes active after power is applied. The red LED bargraph indicator gives a visual signal-strength reference during setup and operation.

What the Bundle Changes

The package includes one sensor unit with an integrated 2 m (6.5 ft) cable terminated in a 4-pin connector, eliminating the need to purchase or wire a separate cordset. A potentiometer on the housing allows manual sensitivity adjustment without software tools. No remote-teach function, timing delays, IO-Link communication or hazardous-area certification are provided, so the accessory set is limited to the sensor and its captive cable.