We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular thermostat controller with digital display and three buttons, wall-mount housing, probe and power cord visible

Baldwin Digital Cooling Thermostat Controller 40-108°F 8.3A 1000W White

SKU CH-WJD3-NX2K0

Controls cooling devices from 40 to 108°F with an 8.3A, 1000W outlet and wall-mount design

  • TypeTemperature Controllers
  • Size/Dimensions4.5 in x 3.5 in x 1.6 in
  • ColorWhite
  • Voltage125VAC
  • Mount TypeWall Mount
  • Effortless setup with a simple 3-button interface and Fahrenheit or Celsius display
  • Clear status at a glance thanks to LED cooling and power indicator lights
  • Flexible placement using a 3.94 ft power cord and 4.92 ft temperature probe
  • Versatile cooling control from 40 to 108°F for fans, greenhouses, garages and more
  • ETL listed safety with 125VAC rating and 8.3A 1000W maximum load

Digital Cooling Thermostat

The Baldwin digital cooling thermostat controller automates attic fans, exhaust fans, swamp coolers and similar cooling devices. It suits greenhouse, garage, brewing, fermentation and animal-housing applications where a simple on-off temperature switch is required. The unit operates on 120 VAC 60 Hz and is rated for 8.3 A resistive loads up to 1000 W, with a 400 W limit for motor or rectifier loads. It is not designed for heating pads or any heating equipment.

Thermals Noise Power

The controller switches the connected load on when the probe temperature rises above the set point and off when it falls below, maintaining a range of 40 to 108 °F. The ETL-listed housing contains no moving parts, so operation is silent and power draw is limited to the control circuitry itself. A 3.94 ft three-prong cord plugs into a standard 125 VAC outlet, and the 4.92 ft probe cable allows remote sensing away from the controller.

Accessories Software

The package includes the wall-mount controller with a hanging tab, a 4.92 ft temperature probe and the 3.94 ft power cord. A three-button interface and bright digital display let users set the target temperature in Fahrenheit or Celsius, while LED indicators show power and cooling status at a glance. No software, app or wireless connectivity is provided.

Highlights

  • Effortless setup with a simple 3-button interface and Fahrenheit or Celsius display
  • Clear status at a glance thanks to LED cooling and power indicator lights
  • Flexible placement using a 3.94 ft power cord and 4.92 ft temperature probe
  • Versatile cooling control from 40 to 108°F for fans, greenhouses, garages and more
  • ETL listed safety with 125VAC rating and 8.3A 1000W maximum load

Specifications

TypeTemperature Controllers
BrandBaldwin
Size/Dimensions4.5 in x 3.5 in x 1.6 in
ColorWhite
Voltage125VAC
Mount TypeWall Mount
Part NumberT7B(C)

Questions about this item

How do I mount the Baldwin thermostat on the wall and plug it in without missing the hanging-tab step?

Screw the unit to the wall using the mount holes, hang the probe where you want to sense temperature, then plug the 3.94 ft cord into a 125VAC outlet and set the target on the three-button display.

What part will need replacement first and how often should I check it?

The 4.92 ft temperature probe is the only wear item; inspect the cable jacket and tip each season for cracks or moisture ingress and replace if the reading drifts.

At what load does the controller hit its limit during continuous fan operation?

The relay is rated 8.3A at 125VAC, so any cooling device drawing more than 1000W resistive or 400W inductive will trip the protection first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.