We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red bi-metal hole saw 25 mm with pilot drill bit and arbor

Baldwin AL-23SS05 1" 25mm hole saw pneumatic accessory

SKU CH-V2T3-WJZEN MPN AL-23SS05

Cuts 25 mm holes in wood, plastic, drywall and thin metal using a bi-metal hole saw with pilot drill bit for pistol, bench or press drills

  • MaterialSteel
  • Selling Unit1"(25MM), 1, hole saw and arbor with drill bit
  • Color/FinishRed
  • Features1"(25MM)
  • Item Count1, hole saw and arbor with drill bit, 1"(25MM)
  • Commercial/Residential1"(25MM)
  • Cuts wood, plastic, drywall and thin metals with bi-metal HSS teeth
  • 25 mm cutting diameter and 31 mm opening depth for recessed lights and vents
  • 6 inch hole saw with arbor and pilot drill bit ready for pistol or bench drills
  • High-speed steel construction gives higher hardness, toughness and wear resistance
  • Simple arbor lock lets you line up pins and secure the saw quickly

Hole saw for wood, plastic and thin metal

The Baldwin AL-23SS05 is a 25 mm bi-metal hole saw with an included arbor and pilot drill bit. It cuts clean openings in wood, plywood, plastic, drywall, plaster and thin sheet metal. The set is designed for tradespeople and DIY users installing recessed lights, vent pipes or cable runs.

Low heat and vibration in hand drills

High-speed steel teeth reduce friction so the tool runs cool in a pistol drill, bench drill or drill press. The bi-metal construction resists wear and keeps cutting force low, which limits vibration and noise during normal use. A standard drill chuck is the only precondition.

25 mm cutting diameter with 31 mm depth

The saw cuts a precise 25 mm hole to a maximum depth of 1.25 inches. This single dimension decides whether the accessory matches the fixture or pipe you are fitting. Buyers needing a larger or smaller bore must choose a different size.

Highlights

  • Cuts wood, plastic, drywall and thin metals with bi-metal HSS teeth
  • 25 mm cutting diameter and 31 mm opening depth for recessed lights and vents
  • 6 inch hole saw with arbor and pilot drill bit ready for pistol or bench drills
  • High-speed steel construction gives higher hardness, toughness and wear resistance
  • Simple arbor lock lets you line up pins and secure the saw quickly

Specifications

BrandBaldwin
ModelAL-23SS05
MaterialSteel
Selling Unit1"(25MM), 1, hole saw and arbor with drill bit
Color/FinishRed
Features1"(25MM)
Item Count1, hole saw and arbor with drill bit, 1"(25MM)
Commercial/Residential1"(25MM)
Part NumberAL-23SS05

Questions about this item

How do I attach the AL-23SS05 hole saw to my drill chuck and what is the common alignment mistake?

Insert the arbor shank into the drill chuck and tighten securely. Rotate the hole saw onto the arbor until the locking pins align with the holes, then screw tight. The step often missed is ensuring the pins fully engage the holes before cutting.

Which part of the 1" HSS bi-metal hole saw will wear out first and need replacement?

The high-speed steel cutting teeth on the 25mm diameter saw will dull before the arbor or pilot drill bit. The bi-metal construction resists wear, but repeated cutting of metal or abrasive materials eventually reduces tooth sharpness.

What limits continuous cutting depth with the AL-23SS05 in thick material?

The maximum cutting depth is 1.25" (31mm). Once the hole saw reaches this depth, the cut core fills the cylinder and must be cleared before you can continue deeper.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.