Autonics Corp
Autonics Corp MP5M-4N Digital Panel Meter 5-digit LED 14 modes 50kHz 100-240VAC
Measures frequency to 50 kHz with 14 selectable modes on a 5-digit LED display powered from 100-240 VAC
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 14 operation modes cover frequency, speed, time and counting tasks
- 5-digit 7-segment LED with 8 mm characters reads clearly at a distance
- Measures from 0.0005 Hz up to 50 kHz for wide signal range
- Accepts both PNP voltage and NPN no-voltage inputs
- Operates on 100-240 VAC 50/60 Hz for global mains compatibility
5-Digit LED Panel Meter
The Autonics MP5M-4N is a digital panel meter designed for industrial monitoring and control panels. It presents measurements on a 5-digit 7-segment LED display with 8mm character height for clear visibility in various lighting conditions.
Suited for Multi-Mode Counting
This unit suits engineers and technicians who need a single instrument covering frequency, speed, cycle time, length and accumulation tasks. It is not for applications requiring analogue output, serial communication interfaces or higher input frequency ranges beyond the specified limit.
50kHz Input with Wide Scaling
The meter accepts voltage or no-voltage inputs up to 50kHz and scales readings from -19999 to 99999 across 14 selectable modes. It runs out of headroom for signals exceeding the maximum frequency or for installations needing isolated signal conditioning not provided by the standard input circuitry.
Highlights
- 14 operation modes cover frequency, speed, time and counting tasks
- 5-digit 7-segment LED with 8 mm characters reads clearly at a distance
- Measures from 0.0005 Hz up to 50 kHz for wide signal range
- Accepts both PNP voltage and NPN no-voltage inputs
- Operates on 100-240 VAC 50/60 Hz for global mains compatibility
Specifications
| Brand | Autonics |
|---|---|
| Model | MP5M-4N |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What power source must be available for the MP5M-4N to operate?
The meter runs on 100-240VAC at 50/60Hz, so a standard mains supply is required.
Can the voltage input (PNP) and no-voltage input (NPN) be used with existing sensors on the same panel?
Yes, the unit accepts both PNP voltage input and NPN no-voltage input, allowing mixed sensor types.
How do I confirm the display is showing a valid reading after wiring?
A correct setup will show a value between -19999 and 99999 on the 5-digit 7-segment LED with 8mm characters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



