We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass manual two-way ball valve, straight body, sweat connection, full port, chrome-plated ball, non-locking handle

Apollo

Apollo 94A20801 Manual 2-Way Ball Valve Sweat Brass

SKU CH-8Y7H-E8GMY

Manual two-way brass ball valve with full-port design rated for 600 psi operating pressure

  • Manual two-way ball valve controls combustible-gas flow
  • Brass body with chrome-plated brass ball resists corrosion
  • Full-port design allows unrestricted media passage
  • Rated for 600 psi maximum operating pressure
  • Sweat connection suits copper piping installations

Two-Inch Brass Ball Valve

This Apollo 94A20801 is a manual two-way ball valve with a brass body and chrome-plated brass ball. It features a full-port design and a straight body style rated for 600 psi operating pressure. The sweat connection suits copper piping systems handling combustible gases. A non-locking handle provides simple quarter-turn operation.

Installers needing a full-port shut-off

Plumbers and HVAC technicians working on combustible-gas lines up to 600 psi will find the valve suitable. The sweat ends require soldering skill and copper tube preparation. Buyers who need a threaded or flanged connection should look at something else. Systems requiring 3-A sanitary compliance or a locking handle are not served by this model.

Verify pipe size and media compatibility

Confirm the existing copper tubing matches the two-inch nominal size before ordering. Ensure the system pressure does not exceed the 600 psi rating and that the media is compatible with brass and chrome-plated brass. Check local codes for sweat-joint approval on combustible-gas service. No special tools beyond standard soldering equipment are required.

Highlights

  • Manual two-way ball valve controls combustible-gas flow
  • Brass body with chrome-plated brass ball resists corrosion
  • Full-port design allows unrestricted media passage
  • Rated for 600 psi maximum operating pressure
  • Sweat connection suits copper piping installations

Specifications

BrandAPOLLO VALVES

Questions about this item

What pipe size and soldering equipment do I need to install this 2-inch sweat valve?

The valve has a 2-inch nominal sweat connection; you will need 2-inch copper tube, flux, lead-free solder and a torch to make the joints.

Will this full-port brass ball valve restrict flow in an existing 600 psi compressed-air line?

The full-port design matches the 2-inch pipe bore, so it adds no measurable restriction at the rated 600 psi working pressure.

How can I verify the valve is sealing correctly after I solder it into the line?

Pressurise the system to its normal operating pressure and check the joint and body for leaks; the non-locking handle should turn freely from fully open to fully closed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.