We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass two-way ball valve, sweat connection, full port, straight body

Apollo

Apollo 94A20501 Manual 2-Way Ball Valve Sweat Brass

SKU CH-716F-0X8NQ

Manual two-way brass ball valve with sweat connections and 600 psi rating

  • Full-port design ensures unrestricted flow
  • Chrome-plated brass ball resists corrosion
  • Two-piece construction simplifies maintenance
  • Rated for 600 psi operating pressure
  • Sweat connection suits copper piping

Valve Brass Construction

The Apollo 94A20501 is a manual two-way ball valve built with a brass body and chrome-plated brass ball. Its two-piece construction and full-port design allow unrestricted flow for the rated media. This component suits plumbing and gas distribution systems requiring reliable shut-off.

Installers Using Sweat Connections

The valve is intended for technicians who join copper tubing with sweat fittings and need a 600 psi pressure rating for combustible gases. It does not serve applications demanding a locking handle, steam service rating, vacuum service rating or 3-A sanitary compliance. Installers requiring those features must select a different model.

600 PSI Operating Pressure

The maximum operating pressure of 600 psi is the primary figure that determines whether this valve matches the system design. Verify that the service conditions stay within this limit before installation. The valve carries no steam or combustible gas pressure rating, so those duties are excluded.

Highlights

  • Full-port design ensures unrestricted flow
  • Chrome-plated brass ball resists corrosion
  • Two-piece construction simplifies maintenance
  • Rated for 600 psi operating pressure
  • Sweat connection suits copper piping

Specifications

BrandAPOLLO VALVES

Questions about this item

Will this 1 in sweat brass valve connect directly to my existing copper lines without extra fittings?

Yes, the sweat ends are made to solder onto 1 in copper tubing, so no threaded adapters are needed.

How can I confirm the 94A20501 is sealing properly after installation?

Pressurise the line up to 600 psi and check for leaks at the joints; the chrome-plated brass ball and full-port design should hold pressure without weeping.

Does the box include any pipe dope, flux or solder for the sweat connections?

Only the valve itself is supplied; flux, solder and any thread sealant must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.