We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ball valve with lever handle, half-inch full port, 600 psi rating

Apollo

Apollo 94A10301 Ball Valve 1/2 in 600 psi

SKU CH-M0PF-5X0C4

A manual two-way brass ball valve with a full-port design rated for 600 psi combustible gas service

  • Full-port design allows unrestricted flow
  • Brass body resists corrosion in gas lines
  • Chrome-plated brass ball reduces wear
  • Lever handle enables quick manual shut-off
  • Rated 600 psi CWP for high-pressure service

Manual Two-Way Brass Ball Valve

This manual two-way ball valve uses a brass body and a chrome-plated brass ball for handling combustible gases. The full-port design matches the nominal 1/2 inch pipe size to maintain flow without restriction. It is built for new installations that require a straight-pattern, two-piece valve rated to 600 psi CWP.

Sustained Pressure Performance

The valve is rated for a maximum operating pressure of 600 psi, so the seal and body are designed to hold that pressure continuously rather than only in short bursts. Brass construction resists corrosion from the media, helping the chrome-plated ball maintain a tight shut-off over long periods. The non-locking lever allows quick manual operation whenever the line needs to be opened or closed.

Installation Notes

The valve uses standard 1/2 inch pipe threads on a straight two-piece body, so it threads directly into matching pipework without special tools or adapters. Full-port geometry means the internal bore matches the pipe inner diameter, reducing the risk of flow restriction or debris buildup. Ensure the piping system does not exceed the 600 psi rating and that the media is compatible with brass and chrome-plated brass materials.

Highlights

  • Full-port design allows unrestricted flow
  • Brass body resists corrosion in gas lines
  • Chrome-plated brass ball reduces wear
  • Lever handle enables quick manual shut-off
  • Rated 600 psi CWP for high-pressure service

Specifications

BrandAPOLLO VALVES

Questions about this item

Does the 94A10301 ball valve generate any noise, heat or power draw when it stays open all day?

No, it is a manual brass valve with no motor or electronics, so it runs silently and produces no heat or power consumption.

What piping or fittings must I already have to install this 1/2 in full-port valve?

You need 1/2 in pipe threads or compatible adapters on both sides to connect the straight two-piece brass body.

Will the 600 psi CWP rating work safely alongside older lower-pressure brass fittings I plan to keep?

Yes, the valve handles up to 600 psi cold working pressure, but the overall system rating is limited by the lowest-rated component you retain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.