We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Forged brass ball valve with yellow lever handle, 3/8 inch FNPT connections

Apollo

Apollo 94A10201 Ball Valve 3/8 in 600 psi CWP Lever

SKU CH-A2YW-N3GTA

A full-port brass ball valve with 3/8 in FNPT connections, rated 600 PSI CWP and 0 to 400 degrees F for HVAC, gas and fire protection service

  • Full port design maintains flow through 3/8 in valve
  • Two-piece forged brass body built for general service use
  • Blowout-resistant brass stem enhances operational safety
  • PTFE seats and EPDM seals rated 0 to 400 degrees F
  • Certified to MSS SP-110, UL 125, UL 1477, UL 842, CSA, FM

Full-port 3/8 in ball valve

The Apollo 94A10201 is a manual two-way ball valve built for general flow control in HVAC, combustible gas and fire protection trim and drain service. Its full-port design maintains unrestricted flow through the 3/8 in bore. Forged brass body and chrome-plated brass ball provide durability in commercial and industrial piping systems.

600 psi CWP pressure rating

This valve is rated to 600 PSI cold working pressure and operates from 0 to 400 degrees F, making it suitable for high-pressure water, oil and gas lines within that range. PTFE seats and EPDM seals handle the specified temperature and media compatibility. Systems exceeding 600 PSI or 400 degrees F require a different valve.

FNPT connections and lever handle

Female NPT threads on both ends allow direct inline installation with standard pipe fittings; apply thread sealant and tighten to spec to avoid leaks. The yellow PVC-coated steel lever is non-locking, so add a lock-out device if safety procedures demand it. Blowout-resistant stem reduces risk during pressure cycles. 100% factory tested to MSS SP-110, UL 125, UL 1477, UL 842, CSA and FM standards.

Highlights

  • Full port design maintains flow through 3/8 in valve
  • Two-piece forged brass body built for general service use
  • Blowout-resistant brass stem enhances operational safety
  • PTFE seats and EPDM seals rated 0 to 400 degrees F
  • Certified to MSS SP-110, UL 125, UL 1477, UL 842, CSA, FM

Specifications

BrandAPOLLO VALVES

Questions about this item

What does the 600 PSI CWP rating mean for everyday use?

It means the valve is rated for 600 PSI cold working pressure, so it can handle typical residential and light-commercial water, oil or gas lines at ambient temperature.

Which approvals does the valve carry and what do they cover?

It meets MSS SP-110 for ball-valve design, UL 125, 842 and 1477 for fuel-gas and fire-protection service, plus CSA and FM listings for similar safety applications.

What pipe threads and handle clearance do I need to install it?

Both ends are 3/8 inch female NPT; the yellow PVC-and-steel lever handle needs roughly 2 inches of swing radius to operate fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.