We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze ball valve inline with lever handle

Apollo

Apollo 7710401 3/4" FNPT Bronze Ball Valve Inline

SKU CH-E3GA-7YBC6

Bronze two-way ball valve rated for 600 psi service and 150 psi steam with full-port chrome-plated ball and lever handle

  • Full-port flow reduces restriction
  • Chrome-plated bronze ball resists corrosion
  • 600 psi rating handles high-pressure lines
  • 150 psi steam rating suits heating systems
  • 29 in Hg vacuum rating supports evacuation

Apollo 7710401 Bronze Ball Valve

The Apollo 7710401 is a manual two-way ball valve constructed from bronze with a chrome-plated bronze ball. It features a 3/4 inch FNPT connection and a straight body style designed for inline installation. The full port design allows unrestricted flow for air compressor and vacuum pump systems. Builders needing a different port configuration or material should look elsewhere.

Thermals Noise and Power

This mechanical valve has no electrical components so it produces no noise and draws no power during operation. Steam service is rated to a maximum pressure of 150 psi while general operating pressure reaches 600 psi. Vacuum service is rated to 29 in Hg for evacuation tasks. Installations requiring powered actuation or automated control are not supported by this model.

3/4 Inch FNPT Full Port Specification

The nominal valve size is 3/4 inch with FNPT threads and a full port ball port style. The two-piece bronze body uses a non-locking lever handle for manual operation. Maximum operating pressure is 600 psi for compatible media. Systems requiring 3-A sanitary compliance or combustible gas ratings must select a different valve.

Highlights

  • Full-port flow reduces restriction
  • Chrome-plated bronze ball resists corrosion
  • 600 psi rating handles high-pressure lines
  • 150 psi steam rating suits heating systems
  • 29 in Hg vacuum rating supports evacuation

Specifications

BrandAPOLLO VALVES

Questions about this item

How do I install the Apollo 7710401 3/4" FNPT ball valve, and what is the common mistake?

Thread the 3/4" FNPT ends onto matching male pipe threads using PTFE tape or pipe sealant. The step people get wrong is over-tightening the bronze body, which can crack the casting or strip the threads.

What maintenance or replacement will the Apollo 7710401 valve need later?

Inspect the chrome-plated bronze ball and PTFE seats periodically for wear or leakage. Replace the valve if the lever handle becomes stiff, the ball shows corrosion, or the 600 psi / 150 psi steam ratings can no longer be held.

What is the first limit that appears under sustained use of the Apollo 7710401 valve?

The 150 psi steam pressure rating is the first limit reached in continuous steam service, well below the 600 psi general operating maximum. Exceeding it risks seat deformation and loss of shut-off.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.