We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze ball valve with lever handle and FNPT threads

Apollo

Apollo 75-104-41 3/4" FNPT Bronze Ball Valve

SKU CH-HHZB-065DG

A two-piece bronze ball valve with a 600 psi operating rating and a locking lever handle for secure air-line shut-off

  • Reliable flow control with 600 psi operating pressure rating
  • Secure operation via locking lever handle
  • Durable bronze body resists corrosion
  • Suitable for air media up to 150 psi steam pressure
  • Standard port design ensures efficient flow

Product Identity

The Apollo 75-104-41 is a 3/4" FNPT bronze ball valve designed for inline air compressor and vacuum pump installations. It suits technicians and facility managers who need a manual two-way shut-off for compressed air lines. The two-piece body construction and standard port configuration make it a direct fit for existing 3/4 inch NPT piping. It is not for systems requiring three-way flow diversion, automatic actuation, or hygienic 3-A sanitary compliance.

Installation Notes

The valve threads onto standard 3/4" FNPT connections using common pipe wrenches and thread sealant appropriate for bronze fittings. The locking lever handle allows secure open or closed positioning without specialised tools. Because the body is a two-piece bronze casting, over-tightening can stress the joint between pieces; apply torque evenly and avoid using the valve body as a lever during pipe alignment. The chrome-plated brass ball resists corrosion from air media, but the valve is not rated for vacuum service or combustible gas lines.

Critical Specification

The maximum operating pressure is 600 psi for air media, with a separate steam rating of 150 psi. This pressure ceiling determines whether the valve matches your compressor output and system safety factors. Exceeding 600 psi risks body deformation or seal failure, so verify your line pressure before specifying this part. The California Proposition 65 notice indicates the presence of listed chemicals, which may affect material suitability in regulated environments.

Highlights

  • Reliable flow control with 600 psi operating pressure rating
  • Secure operation via locking lever handle
  • Durable bronze body resists corrosion
  • Suitable for air media up to 150 psi steam pressure
  • Standard port design ensures efficient flow

Specifications

BrandAPOLLO VALVES

Questions about this item

How can I confirm the valve is operating correctly after installation?

Pressurise the system up to 600 psi and verify there are no leaks at the 3/4" FNPT connections; the lever handle should turn smoothly to open and close the chrome-plated brass ball.

What comes in the box and what must be purchased separately?

The package contains the Apollo 75-104-41 bronze ball valve with locking lever handle; pipe sealant or thread tape for the FNPT connections and any required piping or fittings are not included.

Which pressure rating should I match to my application?

Choose this model when your system requires a maximum operating pressure of 600 psi for air or 150 psi for steam; it is not rated for combustible gas or vacuum service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.