We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze two-way ball valve with lever handle

Apollo

Apollo 7014564 Manual 2-Way Ball Valve Bronze

SKU CH-X77V-TK5PN

A bronze two-way ball valve rated for 600 psi operating pressure and 250 psi steam service with a 29 in Hg vacuum rating

  • Handles 600 psi operating pressure for demanding systems
  • Rated 250 psi steam service for high-temperature lines
  • Bronze body with chrome-plated ball resists corrosion
  • Full vacuum capability to 29 in Hg
  • Lever handle allows quick manual shut-off

Manual Bronze Ball Valve

This manual two-way ball valve uses a bronze body with a chrome-plated bronze ball in a straight, two-piece construction. It is rated for 600 psi maximum operating pressure and 250 psi steam pressure. The standard port design and lever handle provide straightforward flow control for compatible piping systems.

Installers handling steam or vacuum lines

The valve suits steam service up to 250 psi and holds a vacuum rating of 29 in Hg. It is not rated for combustible gas service and carries no 3-A sanitary standard compliance. Installers needing certified gas ratings or sanitary-grade finishes should select a different valve.

1 in NPT connection size

The nominal valve size is 1 in with NPT threading for direct pipeline installation. This single dimension determines whether the valve matches the existing pipework. Verify the line size before ordering to ensure a proper fit.

Highlights

  • Handles 600 psi operating pressure for demanding systems
  • Rated 250 psi steam service for high-temperature lines
  • Bronze body with chrome-plated ball resists corrosion
  • Full vacuum capability to 29 in Hg
  • Lever handle allows quick manual shut-off

Specifications

BrandAPOLLO VALVES

Questions about this item

What is the maximum operating pressure for the 7014564 ball valve?

The valve handles 600 psi maximum operating pressure and 250 psi for steam service.

What pipe threads and handle clearance does the 7014564 need to fit?

It uses 1-inch NPT threads and a straight bronze body; allow space for the lever handle to swing.

How is the 7014564 installed and what step is often missed?

Thread the NPT ends onto pipe with sealant, then tighten using wrench flats on the valve body — not the handle — to avoid cracking the bronze.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.