We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze two-piece inline ball valve with stainless steel lever handle

Apollo

Apollo 7010527 1 in Manual 2-Way Ball Valve Bronze

SKU CH-47C6-A28QJ

Manual 1-inch bronze ball valve with FNPT connections, PTFE seals, chrome-plated ball, blowout-resistant stem and locking lever handle rated to 600 PSI CWP and 150 PSI WSP

  • 1 in FNPT connections for easy inline installation
  • Two-piece bronze body rated to 600 PSI CWP for durable service
  • PTFE seats and seals handle -20 to 450 degrees F temperature range
  • Blowout resistant brass stem adds safety under pressure
  • Stainless steel latch-lock handle allows secure manual operation

1 in Bronze Ball Valve for Steam and Air Lines

The APOLLO VALVES 7010527 is a manual two-way ball valve with a two-piece inline bronze body and standard port design. It features female NPT threads on both ends for inline installation in piping systems. A stainless steel lever handle with a latch-lock feature allows secure positioning during operation. The valve is rated for steam service up to 150 PSI WSP and 600 PSI CWP.

Locking Handle and Blowout Resistant Stem Improve

The supplied locking handle lets operators fix the valve in an open or closed position to prevent accidental actuation. A blowout resistant brass stem design helps retain the stem under system pressure. Chrome plated bronze ball construction combined with PTFE seats and seals provides durable sealing surfaces. The assembly supports a vacuum rating of 29 in Hg for evacuation duties.

Verify NPT Thread Size

Confirm that your existing piping uses 1 in female NPT connections to match the valve ends. Ensure the system operating pressure does not exceed 600 PSI CWP or 150 PSI WSP for steam. Check that the media temperature stays within the -20 degrees to 450 degrees F range. This valve is not suited for applications requiring full port flow capacity.

Highlights

  • 1 in FNPT connections for easy inline installation
  • Two-piece bronze body rated to 600 PSI CWP for durable service
  • PTFE seats and seals handle -20 to 450 degrees F temperature range
  • Blowout resistant brass stem adds safety under pressure
  • Stainless steel latch-lock handle allows secure manual operation

Specifications

BrandAPOLLO VALVES

Questions about this item

When will the PTFE seats and seals on the Apollo 7010527 need replacement?

PTFE seats and seals typically last years in clean air or steam service; inspect annually for leakage or stiff handle operation and replace the seat kit if sealing degrades.

What pressure limit is reached first during continuous high-pressure air service on this valve?

The 600 PSI CWP cold working pressure rating is the primary limit for sustained compressed air use at ambient temperature.

How hot does the bronze body and stainless handle get when the valve runs at 450 °F steam all day?

At the 450 °F upper temperature rating the bronze body and stainless steel lever handle will approach steam temperature; use insulated gloves or a handle extension for safe operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.