We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze two-piece ball valve with yellow lever handle, 1 inch FNPT ends

Apollo

Apollo 7010501 1 in FNPT Manual Ball Valve

SKU CH-7GHG-669MX

A two-piece bronze ball valve with 1 in FNPT connections, PTFE seats, chrome-plated bronze ball, blowout-resistant brass stem, rated 600 PSI CWP and 150 PSI WSP from -20 to 450 °F

  • Bronze body with chrome-plated ball resists corrosion for long service life
  • Standard port 2-way design provides reliable flow control in steam and water systems
  • PTFE seats and MPTFE stem packing deliver tight shut-off across wide temperature range
  • Blowout-resistant brass stem stays secure under pressures up to 600 PSI CWP
  • Manual lever handle operates easily from -20 to 450 °F continuous service

Apollo 7010501 1 in FNPT Ball Valve

This Apollo 70 Series valve is a two-piece inline 2-way ball valve with 1 in FNPT x FNPT connections. Bronze body construction uses a chrome plated bronze ball and PTFE seats and seals. A brass blowout resistant stem and adjustable packing gland are fitted. It is factory tested for steam service.

Suits steam and general flow control

Builders needing a 1 in manual valve rated for 600 PSI CWP and 150 PSI WSP with a -20 to 450 degrees F range will find this standard port model suitable. The lever handle is non-locking and made from PVC and zinc-plated steel. Installations requiring a full port design or a different connection type should look elsewhere.

Standard port sizing decides fit

The standard port ball governs the flow coefficient and determines whether this valve matches the system requirements. Pressure ratings of 600 PSI CWP and 150 PSI WSP apply alongside the PTFE seating materials. Verify the port type against the piping specification before purchase.

Highlights

  • Bronze body with chrome-plated ball resists corrosion for long service life
  • Standard port 2-way design provides reliable flow control in steam and water systems
  • PTFE seats and MPTFE stem packing deliver tight shut-off across wide temperature range
  • Blowout-resistant brass stem stays secure under pressures up to 600 PSI CWP
  • Manual lever handle operates easily from -20 to 450 °F continuous service

Specifications

BrandAPOLLO VALVES

Questions about this item

Will this 1 in FNPT ball valve thread directly onto the existing 1 in FNPT piping on my older compressor tank?

Yes, both ends use 1 in FNPT threads so it connects to matching male NPT pipe without adapters.

How can I verify the 7010501 is sealing properly after I install it on a steam line?

Pressurise the line up to the 150 PSI WSP rating and check for leaks at the PTFE seats and the adjustable stem packing gland.

Does the box include pipe sealant or thread tape for the FNPT connections, or do I need to buy that separately?

The valve ships with the yellow PVC and zinc-plated steel lever handle fitted; pipe sealant or thread tape for the FNPT joints is not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.