We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze ball valve with locking lever handle

Apollo

Apollo 7010427 3/4" FNPT Bronze Ball Valve

SKU CH-5ZR8-DHR0W

Manual two-way ball valve with bronze body and chrome-plated bronze ball, rated to 600 psi operating pressure and 29 in Hg vacuum

  • Reliable flow control for steam systems up to 150 psi
  • Rated for 600 psi operating pressure in general service
  • Vacuum-rated to 29 in Hg for evacuation tasks
  • Locking lever handle prevents accidental operation
  • Durable bronze body with chrome-plated bronze ball

3/4" FNPT Bronze Ball Valve

The Apollo 7010427 is a manual two-way ball valve designed for inline flow control in plumbing and compressed-air systems. Its bronze body and chrome-plated bronze ball handle steam, air and non-combustible gases in industrial and commercial installations.

600 psi operating pressure

The valve operates at up to 600 psi for general media and 150 psi for saturated steam. It holds a vacuum rating of 29 in Hg. The standard-port design and two-piece construction limit flow capacity compared with full-port models, so high-volume systems may need a larger valve.

Locking lever handle for safety isolation

A locking lever handle lets operators secure the valve in the open or closed position, preventing accidental actuation during maintenance. The 3/4 inch FNPT connections suit standard threaded piping. This valve is not rated for combustible gas service.

Highlights

  • Reliable flow control for steam systems up to 150 psi
  • Rated for 600 psi operating pressure in general service
  • Vacuum-rated to 29 in Hg for evacuation tasks
  • Locking lever handle prevents accidental operation
  • Durable bronze body with chrome-plated bronze ball

Specifications

BrandAPOLLO VALVES

Questions about this item

Will the 3/4" FNPT threads on this Apollo 7010427 valve match the existing piping on my older compressor tank?

Yes, the valve uses standard 3/4 inch FNPT threads that are common on legacy compressor tanks and piping, so it will thread directly onto your existing fittings without adapters.

How can I confirm the valve is sealing correctly at the 600 psi operating pressure after installation?

Pressurise the system to working pressure, then apply leak-detection fluid or soapy water to the body joints and stem packing; no bubbles indicate the chrome-plated bronze ball and PTFE seats are sealing properly.

Does the box include any pipe sealant or thread tape for the FNPT connections, or must I buy that separately?

The valve ships as the bare bronze two-piece body with locking lever handle only; pipe thread sealant or PTFE tape for the 3/4 inch FNPT connections must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.