We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze two-piece ball valve with yellow PVC lever handle

Apollo

Apollo 7010301 1/2 in FNPT 2-Way Ball Valve

SKU CH-8WTQ-32DGK

A 1/2-inch bronze ball valve with female NPT connections rated for 600 PSI CWP and 150 PSI steam service

  • Rated for steam service up to 150 PSI WSP
  • Bronze body and chrome-plated ball resist corrosion
  • Blowout-resistant brass stem stays secured under pressure
  • PTFE seats and seals handle -20 to 450 °F
  • 100 % factory tested before shipment

Apollo 1/2 in FNPT Ball Valve

The Apollo 7010301 is a manual two-way ball valve with 1/2 in female NPT connections on both ends. It is built for on/off flow control in piping systems and suits installers who need a standard-port bronze valve for general service lines. The two-piece inline body allows straightforward assembly into existing pipework.

600 PSI CWP Rating and PTFE Seals

The valve carries a 600 PSI cold working pressure rating and a 150 PSI working steam pressure rating across a temperature range of -20 to 450 degrees F. PTFE seats and seals provide chemical compatibility and tight shut-off, while the blowout-resistant brass stem stays retained under pressure. Factory testing confirms each unit meets the stated pressure class before it leaves the plant.

Replaces Worn Gate or Globe Valves

This valve replaces older gate or globe valves where quick quarter-turn operation and lower torque are preferred. The jump is worth it when a system needs faster isolation, reduced stem leakage risk, or a lighter lever handle for frequent cycling. It is not for applications requiring full-port flow capacity or automated actuation.

Highlights

  • Rated for steam service up to 150 PSI WSP
  • Bronze body and chrome-plated ball resist corrosion
  • Blowout-resistant brass stem stays secured under pressure
  • PTFE seats and seals handle -20 to 450 °F
  • 100 % factory tested before shipment

Specifications

BrandAPOLLO VALVES

Questions about this item

How do I install the 1/2 in FNPT connections and which step is often missed?

Thread the valve onto 1/2 in male NPT pipe ends using pipe sealant on the male threads only; the step often missed is applying sealant to the male threads rather than the female ports, and avoiding over-tightening which can crack the bronze body.

What maintenance will the PTFE seats and seals need over time?

The PTFE seats and seals are designed for the full -20 to 450 degrees F range and 600 PSI CWP rating; they typically require no routine maintenance, but if leakage appears at the stem or ports the seats and seals must be replaced as a set.

What limit appears first during sustained steam use at 150 PSI WSP?

The 150 PSI WSP steam rating is the primary limit; sustained operation at this pressure and temperatures up to 450 degrees F will stress the PTFE seats before the bronze body or chrome plated ball reach their limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.