We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aomoproing SFF-8643 to 4x SATA 90-degree cable 3.3FT

Aomoproing

Aomoproing SFF-8643 to 4x SATA angle cable 1M 3.3FT

SKU CH-1PZH-ARFSZ

Connects a Mini SAS SFF-8643 host port to four SATA drives using a 90-degree, 3.3 ft cable for tight spaces

Cable Length 3.3 Feet

  • Connects RAID controller to four SATA drives via SFF-8643 host interface
  • 90-degree angled connectors simplify routing in tight chassis spaces
  • Supports 12 Gb SAS throughput for high-speed storage access
  • 3 ft length suits standard server and workstation builds
  • Hybrid SFF-8643 design enables smooth 6 Gb to 12 Gb migration

Internal Mini SAS to SATA cable

This Aomoproing cable links a motherboard or RAID controller with an SFF-8643 host port to four SATA hard drives. The 90-degree connectors help route wires cleanly inside tight enclosures. It is built for internal storage arrays that use the SFF-8643 interface.

Passive design, no extra power

The assembly draws no external power and adds no active cooling, so it runs silently and does not increase system thermals. Signal integrity is maintained across the 3.3-foot length for standard SAS or SATA speeds. Cable bulk is minimal, aiding airflow in dense drive cages.

SFF-8643 host-port requirement

The SFF-8643 end must plug into a host-side port on a controller or motherboard; it will not function when connected to a backplane SFF-8643 receptacle. Buyers whose chassis only expose backplane ports cannot use this cable.

Highlights

  • Connects RAID controller to four SATA drives via SFF-8643 host interface
  • 90-degree angled connectors simplify routing in tight chassis spaces
  • Supports 12 Gb SAS throughput for high-speed storage access
  • 3 ft length suits standard server and workstation builds
  • Hybrid SFF-8643 design enables smooth 6 Gb to 12 Gb migration

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug the SFF-8643 end into my RAID controller without bending the 90-degree connector?

Align the keyed SFF-8643 plug with the controller port and press straight in; the right-angle hood clears adjacent slots so you do not need to force the cable sideways.

Will the four SATA plugs wear out or need periodic replacement?

The SATA connectors are rated for standard mating cycles; no scheduled replacement is required unless a latch breaks or a pin is damaged during drive swaps.

At what throughput does the 1M length hit its practical ceiling under sustained transfers?

The cable supports 12 Gb SAS signalling; sustained throughput is limited by the attached drives and controller, not by the 1 metre assembly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.