We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 50 cm cable with a 36 pin SFF-8643 connector splitting into four SATA connectors

Aomoproing

Aomoproing SFF86434 50CM 12G SFF-8643 to 4 SATA Cable

SKU CH-EVBM-59QWP

Connects a 12 Gbps SFF-8643 RAID controller to four SATA drives with 50 cm hybrid cables supporting 6 Gbps per channel

Cable Length 1.64 Feet

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four 7-pin SATA target connectors with steel latches
  • 50 cm woven mesh sheath aids cable routing
  • P1–P4 markers simplify drive identification after install

SFF-8643 to 4 SATA Cable 50 cm

This new Aomoproing SFF86434 cable links a 12 Gbps host or RAID controller with an SFF-8643 port to four SATA drives. The 36-pin Mini SAS connector plugs into the controller while four 7-pin SATA connectors attach to target drives. Woven mesh sheathing covers half the length for easier routing.

Suits builders wiring internal SATA drives

The cable is designed for internal connections between a controller such as the Adaptec RAID 71605 or 7895 and direct-attached SATA storage. It is not suited for external eSATA links or for drives that require a different host interface. Buyers needing a longer reach than 1.64 ft should consider other options.

12 Gbps hybrid Mini SAS interface

Each SATA lane operates at 6 Gbps while the SFF-8643 host side supports 12 Gbps, allowing a smooth migration from 6 Gbps to 12 Gbps storage networks. This speed rating is the key specification that determines whether the cable matches your controller and drive requirements.

Highlights

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four 7-pin SATA target connectors with steel latches
  • 50 cm woven mesh sheath aids cable routing
  • P1–P4 markers simplify drive identification after install

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What controller connector does this cable need on my RAID card to work?

It requires a 36-pin SFF-8643 male host connector with latch locking on the controller side.

Will the 6Gbps per SATA link still operate if I connect older 3Gbps hard drives to the four target ports?

Yes, the hybrid design provides both 3Gbps and 6Gbps compatibility while migrating toward a 12Gbps storage system.

How can I verify each drive is connected to the correct port after routing the cable inside the chassis?

P1 to P4 markers on the four SATA connectors provide easy identification after installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.