We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aomoproing SFF-8643 Mini SAS HD to four SATA breakout cable, 3.3 ft

Aomoproing

Aomoproing SFF-8643 to 4x SATA breakout cable 3.3 ft

SKU CH-SNSC-Z2YS2

Connects a Mini SAS HD SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives using a labelled 3.3 ft breakout cable

Cable Length 3.3 Feet

  • Connects RAID controller to four SATA drives
  • SFF-8643 host end plugs into motherboard or controller
  • Four 10-pin SATA targets support SATA I and II drives
  • 3 ft length suits internal chassis routing
  • Labeled breakout ends simplify cable management

Aomoproing SFF-8643 to 4x SATA breakout cable 3.3 ft

This internal cable connects a Mini SAS HD SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. It uses UL-listed 12Gb raw SAS cabling and labelled breakouts for easier cable management. The 10-pin SFF-8643 connector is the host side, while the four 7-pin SATA connectors are targets for storage devices.

Compatibility checklist before ordering

Verify that your motherboard or RAID controller provides a Mini SAS HD SFF-8643 host port. The cable will not work if the SFF-8643 port sits on a backplane or if the connector is the SFF-8646 variant. Data transfer speed depends on the capabilities of the SAS controller and the SATA drives installed.

Replaces generic unlabelled fan-out cables

The labelled SATA breakouts and locking connector latches simplify identification and provide a more secure fit than unmarked alternatives. The jump is worth it when building or expanding a storage array that requires clear port mapping and a reliable host-to-target link.

Highlights

  • Connects RAID controller to four SATA drives
  • SFF-8643 host end plugs into motherboard or controller
  • Four 10-pin SATA targets support SATA I and II drives
  • 3 ft length suits internal chassis routing
  • Labeled breakout ends simplify cable management

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors are included and do I need anything else to attach four SATA drives?

The cable has one SFF-8643 Mini SAS HD plug for the controller and four labelled SATA 7-pin female connectors for the drives; no extra adapters are required.

Which Mini SAS version should I check for on my motherboard or RAID controller?

Verify the port is SFF-8643; the cable will not work with SFF-8646 backplane connectors.

What does the 12 Gb raw cable rating mean for my actual transfer speed?

Real-world throughput depends on your SAS controller and the SATA I, II or III drives attached — the cable itself supports up to 12 Gb/s per lane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.