We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil steel pipe saddle clamp threaded 3/4 inch silver finish

Anvil

Anvil 0766260459 Pipe Saddle 3/4 In Threaded Steel hand tool

SKU CH-JA5A-1WRTQ MPN 0766260459

Threaded steel pipe saddle clamps 3/4-inch outlet to 36–1.5-inch run pipe, rated for 3000-class pressure

  • TypeClamps
  • MaterialSteel
  • Weight0.4
  • Threaded steel outlet rated to 3000 psi
  • MSS-SP-97 and ASME B 1.20 compliance
  • Fits 3/4 inch pipe on 36 to 1 1/2 inch runs
  • Durable steel construction weighs .4 lbs
  • Anvil model 766260459 ready for immediate use

Anvil 3/4 In Threaded Pipe Saddle

The Anvil 0766260459 is a steel pipe saddle designed for threaded pipe connections. It suits maintenance technicians and pipefitters who need a reliable branch outlet on existing runs. The clamp-type fitting accepts a 3/4 In outlet on nominal run pipes from 36 down to 1 1/2 In. This new hand tool meets MSS-SP-97 and ASME B 1.20.1 standards.

Steel clamp for 3000 class piping systems

The saddle integrates into Class 3000 threaded networks with a maximum pressure rating of 3000. Its steel construction provides the mechanical strength required for high-pressure service. The threaded outlet connection allows direct engagement with standard pipe threads without welding. Installers must verify run pipe diameter falls within the 36 to 1 1/2 In range before fitting.

Replaces welded branch fittings on threaded lines

This saddle replaces permanent welded outlets when a removable or repositionable branch is preferred. The jump is worth it for systems requiring periodic reconfiguration or where hot work permits are impractical. It is not for installers needing larger outlet sizes, socket-weld ends, or pressure classes above 3000. The .4 weight keeps handling simple during field assembly.

Highlights

  • Threaded steel outlet rated to 3000 psi
  • MSS-SP-97 and ASME B 1.20 compliance
  • Fits 3/4 inch pipe on 36 to 1 1/2 inch runs
  • Durable steel construction weighs .4 lbs
  • Anvil model 766260459 ready for immediate use

Specifications

BrandAnvil
Model0766260459
TypeClamps
MaterialSteel
Weight0.4

Questions about this item

Will the 3000-class steel hold up when the system runs at 3000 pressure continuously?

The Class 3000 steel saddle is rated for a maximum pressure of 3000 and meets MSS-SP-97 and ASME B 1.20.1, so it is designed for sustained use at that limit.

Does the 0.4 lb steel clamp transfer noticeable heat or vibration when mounted on a 36-to-1.5-inch run all day?

At only .4 lb the saddle adds minimal mass, so heat transfer and vibration are negligible during continuous operation on the specified run range.

What pipe preparation is required before threading this 3/4-inch outlet onto the run?

The outlet uses a 3/4-inch threaded connection per ASME B 1.20.1; the run pipe must be cut, reamed and threaded to match that standard before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.