We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aerosol can labelled Anti-Seize Technology 17011 Air Tool Conditioner 11.75 oz

Anti-Seize Technology

Anti-Seize Technology 17011 Air Tool Conditioner 11.75 oz Aerosol

SKU CH-79HJ-R16S9

An 11.75 oz aerosol air tool conditioner with ISO viscosity grade 22 and SAE 10W rating for pneumatic equipment lubrication

  • Protects pneumatic tools with ISO 22 viscosity grade
  • Cleans and lubricates in one 11.75 oz aerosol can
  • Operates reliably from -10 °F to 250 °F
  • High 340 °F flash point reduces fire risk
  • Low -45 °F pour point ensures cold-weather flow

Anti-Seize 17011 Air Tool Conditioner 11.75 oz

This aerosol conditioner cleans and lubricates pneumatic tools in a single step. The water-based formula carries ISO viscosity grade 22 and SAE grade 10W ratings. It operates reliably from -10 °F up to 250 °F with a flash point of 340 °F. The amber liquid comes in an 11.75 oz aerosol can for convenient application.

Suited for pneumatic tool maintenance.

Mechanics and technicians who need to protect air tools from wear and corrosion will find this conditioner effective. The non-food-grade formulation rules it out for equipment that contacts consumable products. Buyers requiring an NSF-rated lubricant should look at alternative products. The water-based chemistry also differs from traditional petroleum-based oils.

Water-based formula separates this from petroleum

The base oil is water-based rather than petroleum-derived, which changes compatibility with seals and materials. This single characteristic determines whether the conditioner matches a specific maintenance routine. Verify that water-based lubrication is specified for the target equipment before purchase. The ISO 22 viscosity grade supports standard pneumatic tool requirements.

Highlights

  • Protects pneumatic tools with ISO 22 viscosity grade
  • Cleans and lubricates in one 11.75 oz aerosol can
  • Operates reliably from -10 °F to 250 °F
  • High 340 °F flash point reduces fire risk
  • Low -45 °F pour point ensures cold-weather flow

Specifications

BrandANTI-SEIZE TECHNOLOGY

Questions about this item

What type of air compressor or pneumatic system do I need to use this 11.75 oz aerosol conditioner with?

This conditioner is designed for pneumatic tools and systems that accept ISO Viscosity Grade 22 or SAE Grade 10W lubricants, with an operating range of -10 to 250 Degrees F.

Can I apply this ISO Viscosity Grade 22 conditioner to older air tools that previously used heavier oil-based lubricants?

Yes, the water-based formula with ASTM Viscosity Grade 100 and pour point of -45 Degrees F is compatible with existing pneumatic equipment and helps clean residue while lubricating.

How can I verify the conditioner is flowing properly after spraying it into my air tool's inlet?

Check for smooth operation at the tool's normal speed, listen for reduced mechanical noise, and confirm the amber-coloured mist exits the exhaust port during use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.