We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium-bronze open striking wrench, 15/16 inch, natural finish

Ampco Safety Tools

Ampco Safety Tools WSO-15/16 Open Striking Wrench 15/16 in

SKU CH-3TAV-31MDB

Non-sparking, non-magnetic, corrosion-resistant striking wrench fits 15/16 inch fasteners

  • TypeHex Key Accessories
  • Non-sparking for safe use around flammable vapours and dust
  • Non-magnetic for work near MRI and clean-room equipment
  • Corrosion-resistant aluminium-bronze alloy withstands severe environments
  • Factory Mutual approved and beryllium-free for regulated workplaces
  • 15/16 in opening with 8 in overall length for striking applications

Open striking wrench for hazardous areas

The Ampco Safety Tools WSO-15/16 is a 15/16 inch open striking wrench made from aluminium bronze. It is non-sparking, non-magnetic and corrosion resistant for use where flammable vapours, liquids, dust or residue are present. Factory Mutual approved and beryllium free, it suits maintenance crews in refineries, chemical plants and similar hazardous locations.

Fits 15/16 inch fasteners in tight clearances

The wrench has an overall length of 8 inches and a 15 degree head angle with 7/8 inch head thickness. The rounded SAE head engages standard hex fasteners without needing a tether point. Its compact profile lets technicians apply impact force on large bolts where a standard box wrench or socket cannot reach.

Replaces steel striking wrenches in explosive

Steel tools can create ignition sources; this aluminium bronze version removes that risk while resisting corrosion in severe environments. The upgrade is worth it when safety protocols require Factory Mutual approved, non-sparking equipment near MRI suites, clean rooms or any area with combustible residue.

Highlights

  • Non-sparking for safe use around flammable vapours and dust
  • Non-magnetic for work near MRI and clean-room equipment
  • Corrosion-resistant aluminium-bronze alloy withstands severe environments
  • Factory Mutual approved and beryllium-free for regulated workplaces
  • 15/16 in opening with 8 in overall length for striking applications

Specifications

BrandAMPCO SAFETY TOOLS
TypeHex Key Accessories

Questions about this item

How much clearance does the 15-degree offset provide when striking the 15/16 in head in tight spaces?

The 15-degree offset on the 8 in overall length lets the handle clear nearby obstructions while you drive the 7/8 in thick head onto fasteners.

Does the aluminum-bronze alloy stay non-sparking and non-magnetic after hours of continuous hammering?

Yes, the Factory Mutual approved alloy retains its non-sparking, non-magnetic and corrosion-resistant properties throughout extended striking work.

What hammer weight and face diameter match the 7/8 in head thickness for safe striking?

Use a hand sledge with a flat face wide enough to cover the 7/8 in thick head so each blow transfers cleanly without mushrooming the wrench.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.