We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 4 ton jack stands with flat rubber top and triangular powdercoat base

AME INTERNATIONAL

AME INTERNATIONAL 4 Ton HD Flat Top Jack Stand Pair 14361

SKU CH-80A6-A7CS1

Pair of 4-ton jack stands with flat rubber tops and triangular bases, adjustable from 13.8 to 21.81 inches

  • TypeExhaust Tools
  • 4-ton capacity per stand for heavy lifting
  • flat-top rubber grips protect contact points
  • sold as a matched pair for balanced support
  • triangular base design resists tipping
  • height adjusts from 13.8 to 21.81 inches

4-Ton HD Flat Top Jack Stands

This pair of heavy-duty jack stands supports up to four tons per stand and is designed for professional garage and shop use. The flat-top rubber grips provide a secure lifting point while the stable triangular base resists tipping during service work. Sold as a matched pair, they must always be used together for safe vehicle support.

Upgrade from lower-capacity stands

Moving to this four-ton set is worthwhile when servicing heavier trucks, SUVs or commercial vehicles that exceed the rating of standard two- or three-ton stands. The increased capacity and flat-top design reduce the risk of slippage on frame rails or pinch welds. The height range from 13.8 to 21.81 inches covers most common lift points without excessive blocking.

Check your workspace and vehicle

Verify that the minimum height of 13.8 inches clears your lifted vehicle's designated jacking points and that the maximum of 21.81 inches provides enough working clearance. Ensure the floor is level and solid enough to support the triangular bases without sinking. Confirm the vehicle's gross weight does not exceed the combined eight-ton pair rating before beginning any lift.

Highlights

  • 4-ton capacity per stand for heavy lifting
  • flat-top rubber grips protect contact points
  • sold as a matched pair for balanced support
  • triangular base design resists tipping
  • height adjusts from 13.8 to 21.81 inches

Specifications

TypeExhaust Tools

Questions about this item

What is the minimum and maximum height of the AME International 14361 jack stands?

Each stand adjusts from a minimum height of 13.8 inches to a maximum height of 21.81 inches, allowing precise positioning under the vehicle lift point.

How are the AME International 14361 jack stands correctly set up under a vehicle?

Always use the pair together on a level surface, align the flat top rubber grip with the factory lift point, raise the saddle until firm contact is made, and lock the pin through the nearest adjustment hole.

What should be inspected before every use of the AME International 14361 jack stands?

Check the powdercoat finish on the triangular base for cracks or corrosion, verify the locking pin moves freely and seats fully, and confirm the flat top rubber grip is intact and not torn or missing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.