Alcotec
Alcotec ER4043 3/64 16 lb Aluminum MIG Wire
Aluminium MIG welding wire, AWS ER4043 classification, 0.047 in diameter on a 16 lb steel spool for aluminium-to-aluminium joints
- TypeWelding Supplies
- ER4043 alloy matches 4043-grade aluminium for strong joints
- 047 in diameter feeds smoothly through MIG guns
- 34 ksi tensile strength holds structural aluminium welds
- 16 lb steel spool supports long production runs
- DCEP current with 100 % argon shields flat, horizontal, overhead and vertical-up positions
Alcotec ER4043 3/64 Aluminum MIG Wire
This 16 lb steel spool contains ER4043 alloy aluminium welding wire with a 0.047 in diameter. It is designed for MIG welding aluminium to aluminium in flat, horizontal, overhead and vertical-up positions using DCEP current with 100 percent argon shielding gas. The wire suits fabrication shops and maintenance teams working on 4043 grade aluminium structures.
Mechanical properties and process fit
As-welded tensile strength reaches 34 ksi while yield strength measures 28 ksi under 100 percent argon. The minimum required yield strength is 10 ksi. The alloy 4043 series provides good fluidity and crack resistance for general-purpose aluminium joining without the higher strength demands of 5xxx series filler metals.
Upgrade considerations
This spool replaces smaller 1 lb or 2 lb packs when production volume justifies the 16 lb capacity and reduces changeover frequency. The jump is worth it for shops running continuous MIG passes on aluminium assemblies where consistent feed from a steel spool outweighs the handling weight. Buyers who need higher strength welds on 5xxx or 6xxx base alloys should select a different filler classification.
Highlights
- ER4043 alloy matches 4043-grade aluminium for strong joints
- 047 in diameter feeds smoothly through MIG guns
- 34 ksi tensile strength holds structural aluminium welds
- 16 lb steel spool supports long production runs
- DCEP current with 100 % argon shields flat, horizontal, overhead and vertical-up positions
Specifications
| Brand | ALCOTEC |
|---|---|
| Type | Welding Supplies |
Questions about this item
How do I install the ER4043 wire on a MIG welder and what step is often missed?
Mount the 16 lb steel spool, thread the 0.047 in wire through the drive rolls and liner, and set the machine to DCEP polarity — the step many skip is confirming the drive-roll groove matches the 0.047 in diameter.
What maintenance or replacement will the ER4043 wire need later?
Replace the spool when the 16 lb of ER4043 alloy 4043 wire is consumed; periodically clean or change the contact tip and liner to prevent aluminum buildup that causes feeding issues.
What limit appears first during sustained welding with this ER4043 wire?
The wire’s as-welded yield strength of 28 ksi with 100 percent argon shielding is the first mechanical limit reached under continuous load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213892BTC
In stock