AIRSURE Q3 150 PSI 30 L/min 7.4 V Battery Air Compressor Part
Cordless tyre inflator delivers up to 150 PSI at 30 L/min from a 7.4 V battery with auto shut-off and LED light
- Compatibility/FitmentQ3
- Item Count1
- Maximum Working Pressure150 pounds_per_square_inch
- FinishBlack
- Drive TypeBattery Powered
- Motor Voltage7.4 volts
- Inflates tyres to 150 PSI in minutes
- 30 L/min flow rate fills tyres quickly
- 4 V rechargeable battery enables cordless operation
- Auto shut-off stops at preset pressure
- Built-in LED light aids night-time use
Cordless tyre inflator up to 150 PSI
The AIRSURE Q3 is a battery-powered portable compressor that delivers up to 150 PSI and 30 L/min flow. It runs on an internal 7.4 V rechargeable pack so no mains socket or vehicle outlet is required. Four preset modes cover car, motorcycle, bicycle and sports balls with matching nozzle attachments. A digital gauge and auto shut-off stop inflation at the set pressure.
Drivers, cyclists and campers needing fast
Suits anyone who wants a compact pump for roadside tyre top-ups, bike tyres or sports equipment without hunting for a power source. The built-in LED light helps in low-light conditions. Not for users who need continuous high-volume air delivery such as workshop pneumatic tools or large inflatables that exceed the 30 L/min capacity.
150 PSI maximum working pressure
This single figure decides whether the Q3 can handle your tyres. Most passenger-car and motorcycle tyres fall well within the 150 PSI limit, while some light-truck or commercial tyres may require higher pressure. Check the vehicle placard before buying; if the specified cold pressure is above 150 PSI this compressor will not reach it.
Highlights
- Inflates tyres to 150 PSI in minutes
- 30 L/min flow rate fills tyres quickly
- 4 V rechargeable battery enables cordless operation
- Auto shut-off stops at preset pressure
- Built-in LED light aids night-time use
Specifications
| Brand | AIRSURE |
|---|---|
| Model | Car mounted inflation pump |
| Compatibility/Fitment | Q3 |
| Item Count | 1 |
| Maximum Working Pressure | 150 pounds_per_square_inch |
| Finish | Black |
| Drive Type | Battery Powered |
| Motor Voltage | 7.4 volts |
| Size/Dimensions | 5.207 cm x 8.7884 cm x 22.098 cm |
| Color/Finish | Black |
| Flow | Car mounted inflation pump, 30 liters_per_minute, Automatic Shut-Off |
| Material | ABS |
| Selling Unit | 2, Count |
| Parts | 1 Year Warranty |
| Labor | 1 Year Warranty |
| Part Number | Q3 |
Questions about this item
How do I install the AIRSURE Q3 compressor and what step is often missed?
Press the nozzle firmly onto the valve stem until it seals, select the correct preset mode for car, motorcycle, bicycle or ball, set the target pressure on the LCD, then start the unit — the auto shut-off stops inflation at the set value, but users often forget to lock the nozzle lever before pressing start.
What maintenance or replacement will the AIRSURE Q3 need later?
Recharge the 7.4 V battery after each use and store it above freezing; clean the nozzle threads and inspect the 4 included attachments for cracks, as the ABS housing and internal pump are not user-serviceable.
What limit appears first during sustained use of the AIRSURE Q3?
The 7.4 V battery will deplete before the 150 PSI / 30 L/min pump reaches its thermal limit, so extended sessions require recharging the pack between inflations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



