We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large silver industrial floor fan with wire grille and three-speed dial

Air King Limited

Air King 30" 3-Speed Industrial Cooling Fan 9070

SKU CH-T1CR-EE1G8

A stationary 30-inch industrial fan delivers three-speed airflow up to 8780 CFM with a 1/3 hp direct-drive motor at 72 dBA

  • MaterialHAWA
  • 30-inch blade moves up to 8780 CFM on high
  • Three-speed control adjusts airflow from 5570 to 8780 CFM
  • 1/3 HP direct-drive motor runs at 1075 RPM for consistent cooling
  • Wall-mount design saves floor space in industrial settings
  • Operates at 72 dBA with 308-watt draw on 120V power

Industrial 30-Inch Air Circulator

This stationary fan delivers three-speed airflow for warehouses, workshops and large garages. A 1/3 hp permanent-split-capacitor motor drives a 30-inch blade at 1075 rpm directly, producing 8780 CFM on high and 5570 CFM on low. Wall mounting keeps the unit off the floor and out of the way.

Practical Limits of 120V Single-Phase Power

The motor draws 2.8 amps at 308 watts on a standard 120V 60 Hz circuit, so no special wiring is required. Air velocity drops to 484 fpm at 20 feet on the lowest setting, while the highest setting still reaches 825 fpm at the same distance. Sound output measures 72 dBA, which is noticeable in quiet offices but typical for industrial spaces.

Steel Construction and Wall-Mount Geometry

The HAWA steel housing measures 33 1/2 inches high by 33 1/2 inches wide with a maximum depth of 24 inches, so verify wall clearance before installation. Non-oscillating operation means airflow stays fixed on one zone, ideal for targeted cooling or drying. Rated for ambient temperatures up to 130 degrees F, the fan suits hot industrial environments without derating.

Highlights

  • 30-inch blade moves up to 8780 CFM on high
  • Three-speed control adjusts airflow from 5570 to 8780 CFM
  • 1/3 HP direct-drive motor runs at 1075 RPM for consistent cooling
  • Wall-mount design saves floor space in industrial settings
  • Operates at 72 dBA with 308-watt draw on 120V power

Specifications

BrandAir King
MaterialHAWA

Questions about this item

Should I choose the high or low CFM setting for my space?

The fan delivers 8780 CFM on high and 5570 CFM on low; select high for maximum airflow in large areas or low for quieter operation in smaller spaces.

What does 8780 CFM mean when the fan is running in my building?

At high speed the unit moves 8780 cubic feet of air per minute, producing an air velocity of 825 feet per minute at 20 feet distance.

How does the 120V AC single-phase supply limit the fan's performance?

The motor draws 2.8 amps at 120V AC, 60 Hz, consuming 308 watts and capping output at 1/3 hp with a fixed 1075 RPM direct-drive design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.