Adamant Custom
Adamant Custom Threadripper 9980X 64-Core Workstation 512GB 10TB NVMe 10TB HDD RTX 5090 32GB
Liquid-cooled desktop workstation with 64-core Threadripper CPU, 512GB DDR5 ECC memory, 10TB NVMe plus 10TB HDD storage, and RTX 5090 32GB graphics running Windows 11 Pro
- WorkloadWorkstation
- TypeDesktop
- AI FeaturesAI Ready
- CPU TypeAMD Ryzen Threadripper
- CPU SocketSocket sTR5
- Number of CPU Cores64-Core Processor
- 64 cores and 128 threads accelerate parallel workloads
- 512 GB DDR5 ECC memory protects data integrity
- 10 TB NVMe storage delivers 7450 MB/s reads
- RTX 5090 32 GB GPU powers AI-ready performance
- 1600 W 80+ Titanium PSU ensures stable power
Liquid-cooled Threadripper workstation
This Adamant Custom desktop pairs a 64-core AMD Threadripper 9980X processor with 512GB of DDR5 ECC memory for professional rendering, simulation and AI workloads. A 360 mm quiet-edition AIO cooler handles the CPU while the Corsair 5000D chassis supplies front and rear 120 mm fans. Windows 11 Pro is pre-installed on a 2 TB Samsung 990 PRO NVMe drive.
Thermals and power at idle
The Seasonic PRIME TX-1600 Titanium unit delivers 1600 W with a 140 mm low-noise fan and Japanese main capacitors. Over-voltage, under-voltage, over-power and short-circuit protections are built in. At light load the liquid loop and case fans run quietly, keeping the 64-core CPU and RTX 5090 32 GB graphics card within comfortable temperature ranges.
Behaviour under sustained load
Under continuous multi-threaded work the 360 mm radiator dissipates heat from the Threadripper 9980X up to its 5.4 GHz boost while the three Samsung 990 PRO SSDs sustain sequential reads up to 7450 MB/s and writes up to 6900 MB/s. The 10 TB SATA HDD adds bulk storage without affecting the NVMe array. The RTX 5090 32 GB remains fed by the high-wattage Titanium supply throughout extended compute sessions.
Highlights
- 64 cores and 128 threads accelerate parallel workloads
- 512 GB DDR5 ECC memory protects data integrity
- 10 TB NVMe storage delivers 7450 MB/s reads
- RTX 5090 32 GB GPU powers AI-ready performance
- 1600 W 80+ Titanium PSU ensures stable power
Specifications
| Workload | Workstation |
|---|---|
| Type | Desktop |
| AI Features | AI Ready |
| CPU Type | AMD Ryzen Threadripper |
| CPU Socket | Socket sTR5 |
| Number of CPU Cores | 64-Core Processor |
| Installed Memory Size | 512GB |
| Hard Drive (Installed) | 10TB |
| HDD Interface | SATA III |
| SSD (Installed) | 10TB |
| LAN Ports | 2 x Ports |
| Operating System | Windows 11 Pro |
Questions about this item
How do I install the 360 mm liquid CPU cooler and which step do people miss?
Mount the radiator to the Corsair 5000D FRAME top or front using the included 120 mm fans, connect the pump header to the GIGABYTE TRX50 AERO D CPU_FAN header, then fill and bleed the loop; the step most skip is setting the pump to PWM mode in BIOS so the 360 mm cooler runs at the correct speed.
What maintenance or replacement will the 1600 W Seasonic PRIME TX-1600 PSU need later?
The 140 mm fan bearings are the only wear item; after several years of continuous load clean dust from the fan and heatsink, and replace the fan if noise rises — the Japanese main capacitors are rated for long life and do not require scheduled replacement.
What limit appears first when the Threadripper 9980X runs sustained all-core workloads?
The 360 mm liquid cooler’s heat‑rejection capacity is reached before the CPU hits its 5.4 GHz boost ceiling, so sustained all‑core clocks settle lower than the single‑core maximum while the 1600 W PSU and 512 GB DDR5 ECC memory remain within spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



