We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five chisel soldering tips in silver metal finish

900M-T-2.4D Soldering Iron Tips 5pcs Set Chisel tip

SKU CH-G7JZ-J3YJP

Five chisel tips for Hakko 900M-series stations, 2.4 mm radius and 60 W rating

  • Watts60
  • Five chisel tips cover multiple joints
  • Oxygen-free copper with iron, chromium and tin plating resists wear
  • Direct fit for Hakko 900M, 907-ESD, 933, 936, 937, 942 stations
  • 4 mm chisel width suits broad PCB pads
  • 5 mm outer diameter matches original tip housing

Chisel Tip Set for Hakko 900M Stations

This five-piece set supplies 900M-T-2.4D chisel tips built for Hakko 900M-series soldering stations. Each tip uses oxygen-free red copper with iron, chromium and tin plating to resist oxidation and maintain heat transfer. The chisel profile measures R2.4 mm by 0.5 mm across a 17.0 mm working length. Compatible models include the 907, 907-ESD, 933, 936, 937 and 942 stations.

60 Watt Limit and 6.5 mm Barrel Fit

The tips are rated for 60 W stations and share the 900M barrel geometry: 6.5 mm outer diameter, 4 mm inner diameter and 25.5 mm base height. Stations exceeding 60 W or using a different barrel diameter will not seat these tips correctly. Verify the station’s wattage and barrel dimensions before fitting to avoid poor thermal contact or mechanical damage.

Direct Replacement for Worn 900M Tips

These tips replace worn or damaged originals on the Hakko 900M, 907 (C1151), 907-ESD (C1152), 933, 936, 937 and 942 stations. The jump is worthwhile when the existing tip shows pitting, reduced wetting or slow heat recovery. Buyers needing finer conical or broader bevel profiles for specialised component work should look for alternative 900M-series tip shapes.

Highlights

  • Five chisel tips cover multiple joints
  • Oxygen-free copper with iron, chromium and tin plating resists wear
  • Direct fit for Hakko 900M, 907-ESD, 933, 936, 937, 942 stations
  • 4 mm chisel width suits broad PCB pads
  • 5 mm outer diameter matches original tip housing

Specifications

Watts60

Questions about this item

Should I choose the 2.4 mm chisel or a different tip shape for general board work?

This set contains five identical 2.4 mm chisel tips (R2.4 mm/0.5 mm × 17.0 mm); choose it when that single profile matches your joints, otherwise select a set with varied shapes.

What does the 60 W rating mean when the tip is heated in a station?

The 60 W figure is the station power the tip is designed for; it determines how quickly the 6.5 mm OD copper core reaches working temperature and recovers heat during soldering.

Will the 6.5 mm outer diameter fit my Hakko 936 handpiece?

Yes — the 6.5 mm OD, 4 mm ID and 25.5 mm base height match Hakko 900M, 907-ESD, 933, 936, 937 and 942 series handpieces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.