We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four 10ml no-clean solder flux syringes with plungers and dispensing tips

8341 No Clean Solder Flux Paste 10ml 4 Pack

SKU CH-GBPH-5FF32

Four 10 ml syringes of no-clean flux paste with plungers and dispensing tips for precise circuit-board soldering

  • Compatibility/FitmentJR-Treela-1424
  • Standards/Certificationsrubber, true
  • Precise, mess-free application with included plungers and dispensing tips
  • Pushing-type design gives smooth, controlled flow and reduces waste
  • No-clean formula leaves minimal residue, eliminating post-solder cleaning
  • Suitable for PCB, phone, appliance and industrial repairs
  • Four 10 ml syringes with plungers and two tips each

8341 No Clean Flux 10ml Syringe

This 8341 no clean solder flux paste comes in a 10ml syringe format. The four-pack supplies enough flux for repeated electronics repair sessions. Each unit includes a plunger and two dispensing tips for controlled placement on circuit boards and components. The pushing-type design delivers smooth, consistent flow during application.

Replaces messy flux pots and brushes

The syringe format replaces open containers that dry out or spill. It is worth switching when you need precise, mess-free deposits on small pads or dense IC leads. The no clean formula removes the post-solder cleaning step required by traditional rosin fluxes. The sealed plunger system prevents waste and keeps the paste fresh between jobs.

10ml capacity per syringe for board-level work

Each 10ml syringe handles multiple phone, PCB, TV or appliance repairs before needing replacement. It comfortably covers fluxing for through-hole and surface-mount joints on typical consumer boards. The volume runs out on high-volume production lines or extended rework sessions where larger cartridges are more practical.

Highlights

  • Precise, mess-free application with included plungers and dispensing tips
  • Pushing-type design gives smooth, controlled flow and reduces waste
  • No-clean formula leaves minimal residue, eliminating post-solder cleaning
  • Suitable for PCB, phone, appliance and industrial repairs
  • Four 10 ml syringes with plungers and two tips each

Specifications

Compatibility/FitmentJR-Treela-1424
Standards/Certificationsrubber, true

Questions about this item

What size syringe and how many dispensing tips are included with each 8341 flux unit?

Each unit is a 10ml syringe and comes with two dispensing tips plus a plunger.

What is the correct sequence to assemble the syringe before first use?

Turn the tube cover counter-clockwise to open, rotate clockwise to install the needle, open the bottom cover, then fit the plunger.

Does the no-clean formula leave residue that must be removed after soldering?

The no-clean formula leaves minimal residue, so post-solder cleaning is not required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.