We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three copper desoldering braid spools in a storage box

3PCS Premium Desoldering Wick 3 Sizes 0.08 0.1 0.12 x 10FT

SKU CH-82RZ-07RG5

Three copper braid widths (.08", .1", .12") each 10 ft long remove solder from circuit boards with minimal residue

  • Three widths cover micro to large joints with .08 .1 .12 inch braid
  • No-clean flux leaves only non-conductive residue so boards need no washing
  • Fine weave copper absorbs solder fast without lifting pads or traces
  • Pure copper braid gives maximum thermal transfer for first-pass desoldering
  • Sturdy storage box keeps three 10FT spools organised and tangle-free

Three widths for PCB repair

This set contains three copper desoldering braids measuring 0.08", 0.1" and 0.12" wide, each ten feet long. It suits technicians, hobbyists and students who need to clear solder from through-hole pads, surface-mount pins and fine-pitch ICs on printed circuit boards.

Sustained absorption across joint sizes

The fine-weave copper maintains consistent thermal conductivity during repeated desoldering passes, so the braid continues to draw molten solder without slowing down. Wider widths handle larger joints and ground planes while the narrow option reaches tight rows of pins without bridging.

Low residue and minimal board stress

The no-clean formulation leaves only a thin, non-conductive film that does not require post-work cleaning. Gentle weave construction prevents copper traces or component leads from lifting during heating, keeping power draw limited to the soldering iron in use. Buyers who need flux in a pen or pump-style desoldering tools will not find them here.

Highlights

  • Three widths cover micro to large joints with .08 .1 .12 inch braid
  • No-clean flux leaves only non-conductive residue so boards need no washing
  • Fine weave copper absorbs solder fast without lifting pads or traces
  • Pure copper braid gives maximum thermal transfer for first-pass desoldering
  • Sturdy storage box keeps three 10FT spools organised and tangle-free

Specifications

No published specifications for this item yet.

Questions about this item

Does the copper braid generate noticeable heat during long desoldering sessions?

The high-purity copper braid conducts heat efficiently to absorb solder quickly, so the wick itself warms up but does not create excess heat beyond what the soldering iron supplies.

What soldering iron tip sizes work with the .08, .1 and .12 inch wick widths?

Choose a tip that matches or slightly exceeds the wick width — fine conical tips for the .08 inch braid, standard chisel tips for the .1 and .12 inch sizes.

Can the braid be used on older through-hole boards without lifting pads?

The fine weave design removes solder gently, making it safe for vintage through-hole PCBs as well as modern surface-mount boards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.