3M
3M F9469PC Adhesive Transfer Tape Acrylic 5 mil 2 pack
Clear acrylic adhesive transfer tape on 5-yard rolls, rated from −40 °F to 300 °F and supplied as a two-pack
- TypeFishing Tapes & Sticks
- Clear acrylic transfer tape bonds without a carrier layer
- 00 mil thickness handles tight gaps and curved surfaces
- Withstands -40 °F to 300 °F continuous service range
- Meets ASTM D897, D1002 and D3654 test standards
- Two rolls included for multiple jobs or spare supply
3M F9469PC Acrylic Transfer Tape 5 mil
This 3M acrylic adhesive transfer tape comes in a pack of two continuous rolls. Each roll is one inch wide and five yards long with a 5.00 mil thickness. The clear tape uses a kraft paper liner and suits general bonding tasks.
Replaces mechanical fasteners and liquid adhesives
The tape bonds without screws, rivets or curing time. It is worth switching when a clean, immediate bond is needed on metal, plastic or painted surfaces. The acrylic formulation resists temperatures from -40 to 300 degrees F.
Two rolls give ten yards of continuous length
The combined length handles repeated small jobs or longer single runs. Headroom ends when the application demands a thicker adhesive layer or a wider coverage than one inch. Standards ASTM D897, D1002 and D3654 apply.
Highlights
- Clear acrylic transfer tape bonds without a carrier layer
- 00 mil thickness handles tight gaps and curved surfaces
- Withstands -40 °F to 300 °F continuous service range
- Meets ASTM D897, D1002 and D3654 test standards
- Two rolls included for multiple jobs or spare supply
Specifications
| Type | Fishing Tapes & Sticks |
|---|
Questions about this item
What width and core diameter does the 1-1/2 inch core tape need for a dispenser?
The tape is 1 inch wide on a 1-1/2 inch core, so a dispenser must accept that core size and at least 1 inch width.
How do I apply the F9469PC transfer tape without trapping the kraft liner?
Peel the kraft paper liner away while pressing the clear acrylic adhesive onto the surface; the liner is not meant to stay on the bond line.
How often should I replace the tape if used near the 300 Degrees F limit?
At sustained high temperatures the acrylic adhesive will degrade faster; inspect bonds regularly and replace rolls once adhesion drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



