3M
3M 8901 Polyester Film Tape Blue 2 in x 10 yd
Polyester film tape with silicone adhesive, 2 in wide by 10 yd long, withstands 40 °F to 400 °F, tensile strength 26 lb-in, adhesion 29 oz/in
- TypeCaulks
- Withstands extreme heat up to 400 °F
- Removes cleanly after high-temperature exposure
- Strong 26 lb-in tensile strength resists tearing
- Thin 2.4 mil profile conforms to irregular surfaces
- Meets ASTM D3330, D3759 and D3652 standards
3M 8901 Polyester Film Tape Blue 2 in x 10 yd
This blue polyester film tape uses a silicone adhesive on a single coated side. The continuous roll measures two inches wide by ten yards long with a thickness of 2.4 mil. It is designed for masking, splicing, and high-temperature holding tasks in automotive and industrial settings.
Check surface temperature
The tape performs between 40 and 400 degrees Fahrenheit, so verify that the substrate stays within this range during use. Ensure the surface is free of oil, dust, and moisture to achieve the specified adhesive strength of 29 oz/in. Confirm that the width and length match the masking area required for the job.
Maintains adhesion and backing integrity during
Under sustained load at elevated temperatures the silicone adhesive resists creep while the polyester backing retains tensile strength of 26 lb/in. The construction meets ASTM D3330, D3759, and D3652 standards for consistent performance over long cycles rather than short bursts.
Highlights
- Withstands extreme heat up to 400 °F
- Removes cleanly after high-temperature exposure
- Strong 26 lb-in tensile strength resists tearing
- Thin 2.4 mil profile conforms to irregular surfaces
- Meets ASTM D3330, D3759 and D3652 standards
Specifications
| Type | Caulks |
|---|---|
| Brand | 3M |
Questions about this item
What comes in the box and is anything else needed for installation?
The box contains one continuous roll of 3M 8901 polyester film tape measuring 2 in wide by 10 yd long with a silicone adhesive on one side; no additional tools or materials are required for application.
Which version of the 8901 tape should I choose for my project?
This listing is for the single 2 in x 10 yd roll in blue; no other widths, lengths or colours are offered under this product number.
How does the 26 lb-in tensile strength and 29 oz/in adhesive strength perform in a real assembly?
The tape delivers 26 lb-in tensile strength and 29 oz/in adhesion while withstanding temperatures from 40 to 400 °F, making it suitable for high-temperature masking and holding tasks in automotive and industrial environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



