3M
3M 740 UV Polymer Adhesive Sealant 20 oz Sausage Pack White
White polymer adhesive sealant in a 20 oz sausage pack, UV resistant and paintable with 300 percent elongation for fiberglass, metal, plastic and wood
- UV-resistant polymer sealant protects exterior joints from sun damage
- Paintable finish lets you match any surface colour after curing
- Flexible 300 % elongation absorbs joint movement without cracking
- Works from –40 °F to 194 °F for year-round reliability
- Low 22 g/L VOC content meets strict indoor-air-quality standards
Multipurpose UV-Resistant Sealant
3M 740 is a white polymer adhesive sealant supplied in a 20 oz sausage pack. It bonds fiberglass, metal, plastic and wood while remaining flexible after a one-day cure. The formulation resists ultraviolet exposure and meets ASTM C661 and ASTM D412 standards.
Suitable for general repairs and assembly
Painters and fabricators needing a paintable joint that withstands -40 to 194 Degrees F will find this sealant fit for purpose. Buyers who require a faster skin-over time than the one-hour working window or a non-paintable finish should consider other chemistries.
One-day full cure at room temperature
The sealant reaches full cure in 1 day, delivering 300 percent elongation and a VOC content of 22 g/L. This cure schedule determines whether the application timeline matches your production or repair cycle.
Highlights
- UV-resistant polymer sealant protects exterior joints from sun damage
- Paintable finish lets you match any surface colour after curing
- Flexible 300 % elongation absorbs joint movement without cracking
- Works from –40 °F to 194 °F for year-round reliability
- Low 22 g/L VOC content meets strict indoor-air-quality standards
Specifications
| Brand | 3M |
|---|
Questions about this item
What type of caulking gun or dispenser is required for the 20 oz sausage pack?
Use a standard sausage-pack applicator gun sized for 20 oz foil packs; a regular cartridge gun will not accept the flexible sleeve.
What surface-preparation step is most often skipped before applying 3M 740?
Clean all substrates until dry and free of oil, dust or old sealant; the polymer base will not bond to contaminated fiberglass, metal, plastic or wood.
When will a fully cured bead need to be replaced under continuous outdoor exposure?
The ultraviolet-resistant formula remains flexible from -40 °F to 194 °F with 300 % elongation, so plan on inspection after several years of service rather than a fixed interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



