We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 3M 13741 unitized wheel, six inch diameter, quarter inch face, half inch unthreaded hole

3M

3M 13741 Unitized Wheel 6 in 1/4 in 1/2 in SC Fine

SKU CH-JDSA-0FKCE MPN 13741

A silicon-carbide non-woven wheel for fine surface finishing at up to 5,000 RPM

  • TypeSanders
  • Fine-grade silicon carbide delivers smooth finishing
  • Soft density rating 2 conforms to contours for consistent results
  • 6-inch diameter covers more surface per pass
  • 5,000 RPM maximum speed suits bench grinders and right-angle tools
  • 1/2-inch unthreaded hole fits common arbors without adapters

3M Unitized Wheel Fine Grade

The 3M 13741 unitized wheel is a non-woven abrasive disc built for surface conditioning on metal. It suits fabricators and maintenance technicians who need consistent blending, cleaning or finishing without aggressive stock removal.

Silicon Carbide Soft Density Construction

The wheel uses silicon carbide grain in a soft density (2) structure rated Fine grade. This combination decides whether the part matches the application, delivering controlled cut and conformability on contoured or irregular surfaces.

5,000 RPM Maximum Operating Speed

Normal use stays within the 5,000 RPM limit, producing moderate heat and low vibration on compatible tools. The unthreaded 1/2 in hole mounts directly on standard arbors, and the gray non-woven construction resists loading during extended finishing passes.

Highlights

  • Fine-grade silicon carbide delivers smooth finishing
  • Soft density rating 2 conforms to contours for consistent results
  • 6-inch diameter covers more surface per pass
  • 5,000 RPM maximum speed suits bench grinders and right-angle tools
  • 1/2-inch unthreaded hole fits common arbors without adapters

Specifications

TypeSanders
Brand3M
Model13741

Questions about this item

How does the 5,000 RPM maximum speed affect the finish when this wheel is mounted on a bench grinder?

Running at or below 5,000 RPM lets the soft density and fine-grade silicon carbide produce a consistent satin surface without gouging the workpiece.

What does the 1/2-inch unthreaded hole mean for mounting on my tool?

The 1/2-inch unthreaded hole slides onto a matching arbor or mandrel and is secured with a flange and nut supplied by the grinder.

Will the 6-inch diameter and 1/4-inch face width fit my standard bench grinder guards?

The 6-inch diameter matches common bench grinder wheels; the 1/4-inch face is narrower than standard wheels so existing guards usually clear it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.