We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cylindrical convolute wheel with 3-inch center hole

3M

3M 05135 XL-WL Convolute Wheel Fine 8x1x3 Power

SKU CH-A650-3T0XH MPN 05135

Convolute wheel for deburring and finishing, 8-inch diameter with fine silicon-carbide abrasive and 4,500 RPM maximum speed

  • TypeSanders
  • Fine-grade silicon carbide for smooth deburring
  • Non-woven open coating resists loading during use
  • Hard density rating 9 maintains wheel shape
  • 8-inch diameter fits 3-inch arbor spindles
  • Maximum operating speed 4 500 RPM

Non-woven convolute wheel for deburring

This 3M convolute wheel uses silicon-carbide abrasive in an open non-woven construction rated Hard density 9 and Fine grade. The wheel measures 8 inches overall diameter with a 1-inch face width and a 3-inch centre hole for bench grinders or straight-shaft tools. It runs at up to 4,500 RPM for light deburring and finishing on metal surfaces.

Suited for light finishing, not heavy stock removal

The Fine grade and open coating serve operators who need controlled material removal without gouging, such as blending weld seams or cleaning burrs on stainless steel, aluminium or mild steel. Workshops requiring aggressive grinding, rapid stock removal or coarse surface preparation should choose a different abrasive type.

Maximum operating speed 4,500 RPM

This speed limit is the critical specification for safe mounting; the wheel must only be used on equipment that does not exceed 4,500 RPM at the spindle. Exceeding this rating risks wheel disintegration and operator injury.

Highlights

  • Fine-grade silicon carbide for smooth deburring
  • Non-woven open coating resists loading during use
  • Hard density rating 9 maintains wheel shape
  • 8-inch diameter fits 3-inch arbor spindles
  • Maximum operating speed 4 500 RPM

Specifications

TypeSanders
Brand3M
Model05135

Questions about this item

What spindle size must my bench grinder have to mount this 3 in connector wheel?

The wheel's 3 in centre hole fits a standard 3 in spindle or an adaptor that matches that diameter.

Can I run this XL-WL wheel on a grinder rated above 4,500 RPM?

No — the maximum operating speed is 4,500 RPM, so the machine must not exceed that limit.

How do I confirm the wheel is performing correctly once installed?

The gray silicon-carbide face should cut smoothly without loading, and the hard density rating (9) keeps its shape under pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.