We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red glazing putty tube 14.5 oz acrylic base

3M

3M 05098 Glazing Putty 14.5 oz Tube Red

SKU CH-4E4F-3GYSZ

Red acrylic glazing putty in a 14.5 oz tube cures fully in 20 minutes and withstands temperatures from 55 to 110 °F

  • Ready to sand in 20 minutes with full cure
  • One-part acrylic formula requires no mixing before use
  • Red colour shows clearly against primer for easy application
  • 5 oz tube covers typical glazing jobs
  • Operates from 55 to 110 °F for year-round use

Product Identity

3M 05098 Glazing Putty is a one-part acrylic sealant supplied in a 14.5 oz tube. The red compound is formulated for glazing applications where a fast-setting, paintable material is required. It meets 29 CFR 1910.1200, ANSI, EU REACH, EU RoHS and OSHA standards. California Proposition 65 warnings apply for cancer and reproductive harm.

Upgrade Context

This putty replaces slower-curing glazing compounds that demand extended working or cure periods. The jump is worthwhile when a two-minute working window and a twenty-minute full cure allow the job to progress without overnight delays. It is not suited for applications needing longer tooling time or a multi-component system.

Sustained Load Behaviour

The material retains its seal between 55 and 110 degrees Fahrenheit, maintaining adhesion through daily thermal cycling. Acrylic chemistry resists embrittlement under repeated expansion and contraction once fully cured. Performance outside the stated temperature range has not been characterised.

Highlights

  • Ready to sand in 20 minutes with full cure
  • One-part acrylic formula requires no mixing before use
  • Red colour shows clearly against primer for easy application
  • 5 oz tube covers typical glazing jobs
  • Operates from 55 to 110 °F for year-round use

Specifications

Brand3M

Questions about this item

What size tube opening or nozzle is needed for the 14.5 oz cartridge?

The 14.5 oz tube fits standard caulk guns; cut the nozzle to the bead width you need and puncture the inner seal before dispensing.

What surface preparation and tooling steps ensure the acrylic putty bonds properly?

Clean the glazing area to bare substrate, apply within the 55–110 °F range, tool the bead smooth within the 2-minute working time, and allow 20 minutes for full cure.

When will the cured putty need inspection or replacement?

The one-part acrylic putty remains serviceable until it shows cracking, chalking or adhesion loss; no scheduled replacement interval is defined.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.