Zyvpee
Zyvpee CL-6023L-10 6cm 12V 210mA 3-pin blower case fan
6 cm blower fan with ball bearing and 3-pin 12 V 210 mA power connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- Color2-Tone
- LEDNon-LED
- FeaturesCPU Fan
- Compact blower design directs focused airflow
- Ball bearing ensures durable continuous operation
- 12 V 210 mA power draw suits low-wattage builds
- 3-pin connector fits standard motherboard headers
- Non-LED 2-tone finish keeps interior lighting clean
6 cm blower fan for tight spaces
The Zyvpee CL-6023L-10 is a 6 cm blower-style case fan designed for compact enclosures where axial airflow is restricted. Its focused exhaust stream suits small form factor builds, projector modules or industrial chassis that need directed cooling.
Ball bearing motor runs on 12 V at 210 mA
The ball bearing assembly provides durable operation at the rated 12 V and 210 mA draw. Power enters through a standard 3-pin connector without PWM control, so speed stays constant. Non-LED housing keeps the unit dark for unobtrusive use.
Three-wire 3-pin plug fits common headers
A 3-pin header supplies power and tachometer feedback to the motherboard or fan controller. The blower outlet directs air across heatsinks or through ducting, freeing adjacent slots that a wider axial fan would block. Verify mounting hole spacing against your chassis before installation.
Highlights
- Compact blower design directs focused airflow
- Ball bearing ensures durable continuous operation
- 12 V 210 mA power draw suits low-wattage builds
- 3-pin connector fits standard motherboard headers
- Non-LED 2-tone finish keeps interior lighting clean
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | CL-6023L-10 |
| Model | CL-6023L-10 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | 2-Tone |
| LED | Non-LED |
| Features | CPU Fan |
Questions about this item
How do I install the 3-pin connector on the CL-6023L-10, and what step do people get wrong?
Plug the 3-pin connector into a 12V fan header; the mistake is forcing it onto a 4-pin PWM header without checking the keyed alignment, which bends pins.
What maintenance or replacement will the CL-6023L-10 need later?
The ball bearing is sealed for life; expect to replace the whole fan when airflow drops or noise rises, typically after several years of continuous use.
What limit shows up first on the CL-6023L-10 under sustained use?
The 210 mA current draw at 12 V sets the thermal ceiling; if the header cannot supply steady current, the blower will throttle or stop.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Micro Connectors CAT6 RJ45 Modular Plug 50 Pack
- RJ45 Connectors
Enfain RJ45 male to female extension cable 90° down angle 1.5 m 28AWG
- 1.5 m



